...
...
...
...
...
...
...
...
...
...
...
...
...
...
Introduction
The alarm queries provide critical information on alarms that have been generated in AdvanceGuard®.
Contents
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Alarm
...
Locations
This query will determine the location of any alarms within the time period and record limitations. The results are depicted as squares in the detection area.
Colour: This determines the colour of the square icons that represent alarm locations on the PPI Display.
...
False Alarms
...
This query will determine the location of any false alarms within the time period and record limitations. The results are depicted as squares in the detection area.
Area Covered (m): Click on the monochrome symbol before the numeric box in order to toggle between None ⃠ , Greater Than or Equal To ≥ , and Less Than or Equal To ≤ qualifiers. ≥ or ≤ must be selected if a value is input.
Colour: This determines the colour of the square icons that represent false alarms on the PPI Display.
...
Alarm Query
...
This query will determine whether any incident alarms were raised within selected parameters. The query can both determine the position of an incident alarm, and which rule(s) were broken if an incident alarm had been raised. This query, like all, is still subject to time period and record limitation. The results are displayed on the PPI as a red circular icon, and as graphs of alarm activity in the results panel. The variables are decided by the following categories:
...
Analysis Status: Select All or individual alarms.
...
Results
...
Alarm Query
The results of an Alarm Query are displayed as a list in the Results panel:
...
On the top left of the Track Query panel there is the Export icon to be used with selected tracks.
Incident Report
The Incident Report lists details about the Incident and displays an Incident Map:
...
If the user has configured the Incident Report to display their own logo (see: https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/206504312/System+Settings#General), then the default, Navtech Radar logo will be replaced with the user’s logo:
...
Incident Summary
Incident Id: Unique alphanumeric identification assigned to each Incident.
...
Incident Map: The map will display the track of the target. It has PPI Controls to help navigate around the map display, including pan, zoom and return to the origin.
Targets
ID: Unique alphanumeric identification assigned to each Target.
...
Cancel: Select Cancel to close the Incident Report.
Alarms By Time
...
The accumulated alarms are also labelled on the PPI Display as a red circular icon; an Alarm Icon. Individual alarms can be located by selecting their locate icon on the Alarm Query list - the PPI will jump straight to the alarm's location, and flashing, red, concentric circles will pinpoint the alarm's location.
...
Thus, a Tracks Query has been performed within an Alarms Query.
...
Video
Here is a video which covers the process of finding an alarm, opening an incident report, manipulating the PPI to select the desired view of the map
and finally, printing the report (to PDF):
...
Related Information
| Filter by label (Content by label) | ||||||
|---|---|---|---|---|---|---|
|
...