Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Enable the Blanking Mode in the Radar Configuration screen. Please refer to this page for information regarding this option: Vertex Radar Configuration.

  2. This will enable the Add Sector button:

  3. Click the Add Sector button to add a blank sector to the screen:

  4. You can adjust the placement of the sector by clicking on it (which outlines the selected sector in blue) and using your mouse-wheel. Scrolling up moves it clockwise, and scrolling down moves it anticlockwise:

  5. Once it is in the desired spot, you can also change the size of the sector by holding down Alt and using your mouse-wheel to increase or decrease the size of the sector:

  6. If you need to add more sectors then repeat steps 3 to 5.

  7. If you wish to remove a sector then click the Remove Sector Button:

  8. When you are happy with your sectors click the Save Sectors button:

  9. Once you have saved the sectors you will need to reboot the system:

  10. After the reboot you will need to login and click the Refresh button to see the changes:

  11. To edit an existing sector, click the sector to select it and use your mouse-wheel to adjust the placement, and holding down Alt while using your mouse-wheel to adjust the size of the segment. Then repeat steps 8 to 10.

...

Save Sectors: This will save the sectors.

Cancel: Click Cancel to This will cancel any changes made.

...

Related Information

...