Introduction
This page gives information regarding the ICD-001 Camera Report.
Contents
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Track - Automatically tracking a target
Home - Camera is moving to its home position (inactive)
Manual - The operator has moved the camera through the Sentinel UI
Override - A keyboard or external input has been used to move the camera
Camera Attributes
Attribute | Description | Type | Unit |
Reported | Time camera move was instructed | DateTime | |
CameraId | The unique id of the camera. This is normally set on the camera hardware. | Integer | |
Active | Indicates whether the camera is actively tracking or has been moved by an operator. A camera is inactive when it is resting at its home position. | Boolean | |
MoveType | Indicates the reason why the camera moved i.e. as a result of following a track or from a manual override by an operator.
| CameraMoveTypeList | |
TrackId | If Camera is following a track, this gives the Display ID of the track being followed. If Camera is not following a track, this will be 0. | string | |
UniqueTrackId | If Camera is following a track, this gives the unique Id (GUID) of the track being followed.If Camera is not following a track, this attribute will not be available. | string | |
ExternalCameraId | External Id of the camera. This is typically the camera Id used by an integrated VMS or Security System. | string | |
AlarmKey | Unique key of alarm - this can be matched up with AlarmKey on the Alarm Report | string |
...
Related Information
| Filter by label (Content by label) | ||||||
|---|---|---|---|---|---|---|
|
...