...
| Info |
|---|
Detection Areas are not required by default for ClearWay™ because the carriageway is your Detection Area. Additional Detection Areas can be added to override this automatic setup. |
Creating a Detection Area
Enable the Config Function, then select Areas in the Configuration Tree.
In the Configuration Panel, select New, then select New Area to activate the Create New Area Wizard.
In the Create New Area Wizard, select 'Detection' from the Type dropdown list. Configure the rest of the options, and select Finish.
Use Standard Creating and Editing to edit the shape and orientation of the Detection Area.
Select Save.
Next, go to Radar Settings, by selecting Radar Group, then selecting Settings in the Configuration Panel.
Select the Track Settings expansion button, and then select the Channel you wish to apply the Detection Area to.
Scroll down to the Tracking Areas section. Select Edit, and then select the ➕ button. Two dropdowns will open requesting Area Type and Tracking Parameter values. Assign your Detection Area to Security Medium Sensitivity. Select OK, then Save.
Your Detection Area is now assigned to the correct Tracking Parameter. Remember that multiple, overlapping Areas must be listed in order of importance in the Tracking Area list.
...
| Filter by label (Content by label) | ||||||
|---|---|---|---|---|---|---|
|
...