Introduction
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Alarm Queries
Alarm Locations:
...
This query will determine the location of any alarms within the time period and record limitations. The results are depicted as squares in the detection area.
a. Colour: this This determines the colour of the square icons that represent alarm locations on the PPI Display.
...
False Alarms:
...
This query will determine the location of any false alarms within the time period and record limitations. The results are depicted as squares in the detection area.
a. Area Covered (m): click Click on the monochrome symbol before the numeric box in order to toggle between None ⃠ , Greater Than or Equal To ≥ , and Less Than or Equal To ≤ qualifiers. ≥ or ≤ must be selected if a value is input.
b. Colour: this This determines the colour of the square icons that represent false alarms on the PPI Display.
...
Alarm Query: this query will determine whether any incident alarms were raised within selected parameters. The query can both determine the position of an incident alarm, and which rule(s) were broken if an incident alarm had been raised. This query, like all, is still subject to time period and record limitation. The results are displayed on the PPI as a red circular icon, and as graphs of alarm activity in the results panel. The variables are decided by the following categories:
a. Areas: You may select multiple areas to query at once.
...
b. Rules: you You may select multiple rules to query at once.
...
c. Users: You may select multiple users to query at once.
...
d. Radars: You may select multiple radar to query at once.
...
e. Analysis Status: Select All or individual alarms.
...
Results Example
1. Alarm Query results are displayed as:
...