...
| Info |
|---|
If the static sensor does not lie within an existing defined area, or the existing area uses an unsuitable rule (such as one that detects movement), create a new area and rule for the static sensor. |
Settings
Basic:
Name: the name of the static sensor.
User ID:
Range: slide to adjust the range of the static sensor's sector of detection along the radii.
Angle: slide to adjust to rotate the static sensor's sector of detection around the static sensor.
FOV: field of view - slide to adjust the area of the sector of detection by widening the static sensor's angle of detection.
Hide Arc: select to hide the static sensor's arc around the sector of detection.
Trigger Id: the Id of the external trigger's input associated with the ADAM-6060 connection.
Layer: which layer the static sensor is on.
Hide: select to hide the static sensor on the PPI.
Label Visibility:
Colour: choose a colour for the static sensor on the PPI.
Position
...
This must match the location of the physical sensor.
X/Y/Z and Lat./Long.: each new static sensor is initially assigned the default Latitude and Longitude of the installation origin. You can then adjust the X and Y settings to define the offset position (in metres) of the sensor from the origin point. You can adjust the X and Y settings either by typing the offsets into the fields or you can drag the sensor icon to the required position on the graphical representation. The Lat. and Long. values for the sensor position are calculated using the known origin point plus the X and Y offsets.
Camera Preset
...
X/Y:
Lat./Long.:
...
Related Information
| Filter by label (Content by label) | ||||
|---|---|---|---|---|
|
...