...
6. The Exclusion Area will now not register any tracks that pass through it. They will be spotted again once they have left the Exclusion Area.
...
Exclusion Area Example
...
...
In this example, a
...
Person is approaching the Exclusion Area:
...
2. The Vehicle track disappears into the Exclusion Area:
...
3. Once outside of the Exclusion Area, the Vehicle Person reappears as a new track. Now the Person track has been lost to the Exclusion Area.
...
7. Scroll down to the Tracking Areas section. Select Edit, and using the ➕ button, assign your Partial Exclusion Area to Highways or Security with Partial Parameters. Select OK then Save.
...
8. Your Partial Exclusion Area is now assigned to the correct Tracking Parameter. Remember that multiple
| Info |
|---|
Multiple, overlapping Areas must be listed in order of importance in the Tracking Area list |
...
. You can only order within the same parameter type and Partial parameters must be higher than normal parameters. This is because partial parameters are more restrictive than normal parameters, therefore, they have to have a higher priority otherwise they would not work. |
...
| Info |
|---|
Note that a Tracking Area can be removed from a Channel by selecting it from the list, pressing the ➖ and then selecting Save. This does not delete the actual Area. |
...