Introduction
Contents
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Example Status Report
| Code Block | ||
|---|---|---|
| ||
<?xml version="1.0" encoding="utf-8"?>
<StatusReport xmlns="ICDNAV001-StatusReport">
<Sender SenderId="SenderId1" NetworkAddress="127.0.0.1" NetworkPort="6317" />
<!-- Module Track Engine 1 is offline -->
<ModuleStatus Name="TE1" Reported="2019-04-03T22:05:02.112" Status="Offline" ModuleId="710e8979-effb-4d2d-94d4-205aa4bd0eae" />
<ModuleStatus Name="TE2" Reported="2019-04-03T22:05:02.112" Status="Online" ModuleId="C565AE57-95C5-4C17-8CF3-E19609067500" />
<ModuleStatus Name="Camera Controller" Reported="2019-04-03T22:05:02.112" Status="Online" ModuleId="AF648F4D-3342-406E-888A-F4FAD05B36AA"/>
<!-- Radar 1 being reported as offline - therefore no health metric can be reported -->
<RadarHealth RadarId="1" Name="Radar 1" Reported="2019-04-03T22:05:02.112" Packets="0" Temp="0" Rotation="0" Status="Offline" />
<!-- Radar 2 being reported with a connection status of warning meaning a temporary loss of connection to the radar -->
<RadarHealth RadarId="2" Name="Radar 2" Reported="2019-04-03T22:05:02.112" Packets="801" Temp="85" Rotation="2.0" Status="Warning" />
<!-- Radar 3 being reported as online but with a warning status because the temperature is too low -->
<RadarHealth RadarId="3" Name="Radar 3" Reported="2019-04-03T22:05:02.112" Packets="1600" Temp="59" Rotation="4.01" Status="Online" HealthStatus="Warning">
<Health Type="Temperature" MinValue="-20" MaxValue="90" Value="-22" Status="Warning" xmlns="ICDNAV001-CommonTypes" />
</RadarHealth>
<!-- The current system profile is the set to the default -->
<SystemProfileStatus Name="Default" ProfileId="-1" Reported="2019-04-03T22:05:02.112" />
<AreaSummary Reported="2019-04-03T22:05:02.112">
<AreaStatus Type="General" Name="Front Gate" AreaId="1" Enabled="Enabled" />
<AreaStatus Type="Detection" Name="Detection North" AreaId="2" Enabled="Enabled" />
<AreaStatus Type="Alarm" Name="Alarm Zone A" AreaId="3" Enabled="Disabled" />
</AreaSummary>
</StatusReport> |
...
Attribute | Description | Type | Unit |
Type | The type of area. These map to the area types in Witness:
| AreaTypeList |
|
Name | The user friendly name of the area | String |
|
AreaId | The User Id for the area | Integer | |
Enabled | The current state of the area. Depending on the type of area, the state has different implications. For example, disabling an Alarm area means it cannot be used inside rules. If a Detection areas is disabled it means the tracker will not generate tracks in that area. Disabling an exclusion area will stop it excluding data from the tracker allowing it to generate tracks | Boolean |
...
Related
...
Information
| Filter by label (Content by label) | ||||
|---|---|---|---|---|
|
...