Automatic Plot Merging
Introduction
This section covers Automatic Plot Merging which processes each selected radar and carriageway, finds the nearest allocated section for each channel and updates the plot merging direction for that channel with the direction of the section. It can also export the calculated changes to a .csv file for auditing.
Contents
Plot Merging Direction Update Settings
Carriageways: The selected carriageway. If you have more than one carriageway you can select an alternative carriageway using the drop-down.
Radars: This drop-down displays all of the radars. They are selected by default but each radar can be deselected individually.
Selected: This displays the radars selection status. By default all radars in the carriageway will be selected. You can deselect all of them and choose individual radars to update.
Carriageway: The carriageway the radar is in.
Radar: The name of the radar.
Radar: The Channel of the radar. For more information about Channels please refer to: https://navtechradar.atlassian.net/wiki/x/pYGfiw.
Current Angle: The current plot merging direction of the section. The Plot Merging Direction setting can be found in the Tracker Plot Merging settings discussed here:Channels (Tracker Settings).
New Angle: The revised plot merging direction using this feature.
Locate: Use the Locate icon to pan the PPI map to the relevant section of the carriageway where the radar is located.
Cancel: This will cancel the update if it has not been applied.
Export: This will export the calculated changes to a .csv file for auditing.
Apply: This will update the Plot Merging Direction for the selected radars.
Automatic Plot Merging En Masse
To merge plots en masse:
Select the carriageway you wish to update:
Click Actions > Plot Merging:
This will open the Plot Merging Direction Update screen:
Please refer to: https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/edit-v2/4367712268#Plot-Merging-Direction-Update-Settings for more information about the displayed settings.
To locate an individual section on the PPI map click the Locate icon:
To export a current .csv file of the Plot Merging Direction Update settings of the radars click the Export button:
You can select which radars you wish to not adjust by using the drop-down to clear individual radars via their selection checkboxes (by default they are all selected):
When you are happy with your selection you can click Apply to apply the en masse radar direction angle change.
The radars have to be allocated to a track engine to appear in the Radars dropdown.