/
Adding a Radar

Adding a Radar

This page shows you how to add a radar. If you wish to add a Echodyne Panel instead of a radar, please see Echodyne Panels.

Contents

Adding a Radar 

  1. To add a radar, you will need to be in Edit mode. For more information please see: Edit Mode. Next, click on the Add Radar button:

    image-20260408-094108.png

     

  2. A radar selection pop-up will open. Choose a name that is meaningful for the situation:

    image-20260302-073359.png

     

  3. Select the model you wish to use from the drop-down list:

    image-20260302-073653.png

     

  4. When you have chosen the model, you will be able to click the Create button:

    image-20260302-074520.png

     

  5. The radar will be created.  On the map, you will see the radar appear in the centre of the map:

    image-20260408-095124.png

     

  6. You can move your radar into its desired position on the map using left-click+drag with your mouse.

  7. There will also be the radar details in the Properties dialogue. You can amend these properties as desired. Please refer to:Radars for information about these settings.

  8. Click the Save button to save the new radar settings:

    image-20260408-095446.png

     

For further information about radars please refer to: Radars.

For information regarding Trace, please refer to: Trace.

Related Information

 

Safety is everything.