RAS3 - Connection

Owned by John Marshall
Last updated: Jul 23, 2024
2 min read

Power & Network Connection - RAS3 models

RAS3 radars are fitted with a single D38999 (Mil.Spec) connector for a combined power and network cable, part number WIR0159, as illustrated below. Part WIR0141 is an alternative connection cable, rated for operation down to -40°C.

RAS3-DEV-M and RAS3-DEV-X Radars are supplied, as standard, with a 5m power cable as illustrated in the drawing below. Other cable lengths are available to special order - contact Navtech Radar for details.

Note that the radar’s IP (ingress protection) rating is only achieved when the external connection cable is fitted and secured.
(Part D38999/52Z35R is the part number for a sealing plug that can be used if required.)


Scroll down the page for photographs of connector and cable termination details.

RAS3 Radar connection cable detail - WIR0159
(alternate part number WIR0141 by special order: for -40°C operation)
Cable Wiring Detail
(network cable colours as per T568B)


Photographs of connector and cable terminations:

 

 

Â