These release notes cover Clearway V4.1 and above.
Fixed debris to vehicle correlation not working correctly
Version 4.1.0 Build 450 - 21 January 2019
Fixed System layers and the layers folder being able to be deleted
Fixed performance issues when adding radars
Fixed ability to delete a carriageway with child entities
TUN-2599 - Fixed playback track path being very slow to move and edit
Modified rotation control to mouse wheel for playback track and breach line
Fixed issue with Section filter slider in Rule Editor being zero based not one based
Fixed minor issue with Highways Log Query results tab not showing record count
Try and stop authenticode from using the internet for revocation checks
Ensures the existing user does not get saved twice, as it will fail the password and hash check on the second save attempt
Fixed notification stating system profile changed when any system settings settings are changed
Fixed issue where all alarm logs were using the wrong field in System Logs which left blank entries in the log
TUN-2377 - Added debris and other channel threshold window sizes to the radar multi-edit options
TUN-2429 - Added user defined start number to POI creation tool
TUN-2376 - Added ability in CW to record config and update notes
TUN-2375 - Added ability to auto add a CW alarm exclusion area over a selected track in playback
TUN-2374 - Added ability to assign a track analysis status to a track from playback
TUN-2579 - Added ability to assign a alarm analysis status to an alarm from playback
TUN-2380 - Add alarm summary dashboard with full alarm details over the previous 24 / 48 / 72 hours
TUN-2567 - Added (SSO) Single Sign On for use in an active directory environment
Changed UI notifications for clutter floor capture and system profile change to be TE based (so one message per TE, not per radar).
TUN-2427 - Improved upgrade facility to enable changing distance travelled to a positive value if negative
TUN-2381 - Added Queue break allowance and allowance curve support
TUN-2378 - Improved ability to classify debris as vehicles using previous track data as a pointer
Renamed Rule Sub Type Default to Person
Improved handling of errors when starting Scafell
TUN-2111 - Enforced a tolerance of 2m between the center of the mouse and the area edge when editing the Contour area
Tracker ChangePlease note tracker version 4.0.1.82 is only required for legacy radar support, there is no need to upgrade on board trackers from 4.0.1.77 |
Fixed error in shutting down track engine when running with Unicast Discovery
Fixed error in not sending ICD-001 Heartbeats
Fixed inability to copy a rule
TUN-2258 - Fixed the first row of clear buttons on the CW rule section override tab
Fixed Highways logs to show show correct queue data
Fixed playback track initial wait for track simulation
Fixed bug in ICD-001 (Common) where tracks were not being filtered based on TrackOutputMode
Fixed bug in ICD-001 to ensure broken rules are populated on ICD-001 tracks
TUN-2243 - Changed windows sizes to Hits from Metres in SSI settings
Added close following rule (Experimental)
TUN-2256 - Added the ability to use a CW alarm area for alarm exclusion
TUN-2375 - Added ability to create an alarm area from a historic track. This feature can be used to exclude alarms
TUN-2301 - Added an option to raise bad health alarm for radars even in the event of an intentional track engine shutdown
TUN-2307 - Added Per Track Alarms option to Track Speed Rules (Experimental)
TUN-2213 - Added ability to show start and end range rings for STC
TUN-2310 - Added system log for all alarm actions
TUN-2344 - Added ability to search for highway logs in playback
Added Area Info panel, enables quick access to disable/enable and help link
Improved Tab styles
Improved reliability and performance of the VLC based camera viewer
Improved camera alignment process to handle live updates more effectively
TUN-2265 - Improved camera shape
TUN-2234 - Added normal track colour as a user setting
Added Node Id's to CSV export for OCP Plugin
TUN-2250 - Changed default settings for debris channel (Window Size: 25, Coast Extended Time: 10, Coast Age Min: 6, Coast Scans: 6)
TUN-2253 - Removed persist from ClearWay rules because its not applicable
TUN-2248 - Removed properties attribute from Track Classification Probability - this can be achieved using the normal rule classification settings
TUN-2264 - Implemented feature to hide and show height map
TUN-2257 - Add Ticks unit and Hits unit to advanced tab of highways rule to help identify the update increments or decrements that will be used dependent upon the update unit chosen
TUN-2212 - Allow maximum range to be shown in the UI on a camera by camera basis
TUN-2289 - Add a camera priority setting to the user account, commands with a higher priority take priority over lower
TUN-2306 - Improve track recording so that we don't record excessive sightings for stationary debris tracks
TUN-2322 - Changed colour of image pin and placed second pin in bottom right corner
TUN-2341 - Added channel count to radar wizard, allowing users to specify required channels. CW default remains 2
TUN-2373 - Added new alarm description tags for Lane Id and Carriageway Id so these can be included in the alarm output. See notes below
TUN-2385 - Removed requirement for Ctrl key modifier to move or add, remove nodes in areas
Upgraded database Mongo to 3.6.8 - see notes below
Due to the changes made for the alarm description tags, we have had to change the {LANE} tag to display the Lane Name and {LANEID} to display the Lane Id. This ensures all the tags remain consistent for carriageways, lanes and areas. A full list of tag place holders can be found here. |
Version 4.1.0 Build 372 - 08 August 2018
Added ability for OPC to allow anonymous logins
Added support for refreshing the clutter map periodically for SA
In order to fully utilise the clutter map refresh facility, the Clutter Time Constant for SA should be set 100%. This will ensure data is persisted for as long as possible and will be only be absorbed during the scheduled clean up. |
Fixed Carriageway Mode and Section Mode not updating in ICD007
TUN-2126 - Enable OPC events to notify clients of value changes
Fixed incorrect handling of Date Time and Timezone in Licence files
Licence ChangesThis version of software requires a new licence file to be created by Navtech. Old licence configurations cannot be used, a new configuration is required. |
After installing, the installer may have to be run again using Repair to correctly re-install all components. Please note that this must be done on all installations, not just the system hosting the UI. |
TUN-2188 - Add option to backup and restore Alarm history from the database
TUN-2058 - Raise a notification / alarm if we identify a significant time gap between the TEs and MS
TUN-2068 - Added track and track sightings query exports from the playback queries
TUN-2068 - Added carriageway statistics and analysis exports from the playback queries
TUN-2190 - Added the ability to upgrade the database on system start-up to cater for more significant improvements when upgrading with future releases
Added ability to search for tracks of any speed in track query
Added ability to use Area Covered in carriageway rules as part of property filters
Added support for ADAM6060 DIO Unit
Added max network client limit for ICD-001 plugin
Added a new Use NTP TIme system setting. This option provides the ability to ignore NTP track time stamps coming from the radar even when they are configured. This forces the software to use the local time on the Track Engines
Added NTP health metric for the radar so that a alarm will be raised per radar if the NTP time stamp is significantly different to its Track Engine
It is recommended to use the new system setting to disable the use of the NTP time stamps from radar unless you are 100% confident that the NTP setup is working properly for all radar and RPUs. |
Fixed issue with radars sending bad NTP times causing recorded tracks to never expire
TUN-1996 - Disabled image controls on back image config wizard whilst image is loading from the Db so user can't load another image
TUN-2062 - Added option to toggle trace logging for ICD001, this stops track reports from flooding the logs
TUN-2106 - Updated numeric range input for playback queries and rules to handle speed conversions correctly
TUN-2072 - Fixed issue preventing the entering of decimal coordinate values when using the Czech keyboard/locale
TUN-2011 - Ensure we always save the current classification config Id on a sighting so we can always re-inflate data even if track was unclassified.
Fixed Licence error on restart of MS causing exception notifications in the UI
TUN-2115 - Fixed after doing Management server restart the system sends out multiple alarm messages
Fixed inability for Carriageway Profiles to be saved
TUN-1931 - Modified track distance travelled to be aligned with carriageway direction instead of actual distance. This ensures distance travelled is now an accurate reflection of how far a track has moved relative to the carriageway rather than distance along the ground
Added option to carriageway rules to filter required distance travelled to Any direction, Forward or Reverse
TUN-1989 - Made single entities stay in edit when constructed using the wizard, except for folders
TUN-2060 - Removed external IP address binding for the Mongo DB Service so it binds on all
TUN-1661 - Improved operation of drop down lists to make selections easier
TUN-2155 - Added ability to limit number of sightings recorded for a very long living track so that we continue to record but never exceed the specified limit
TUN-2057 - Added break allowance unit to carriageway wizard rules
TUN-2184 - Added entity GUID in entity search results and enables user to copy GUID to clipboard through mouse right click
TUN-2187 - Change maximum retention days for alarms to 1095 from 90
TUN-2070 - Fixed order for Track Engines in Topology editor
TUN-2071 - Added error overview for track engines and radar in topology editor. The alarm notification provides quick access to faulted track engines
Added support for disabling use of NTP time stamps from trackers
Updated Track to only use date / times from the last sighting not the deleted sighting
Enabled support for larger signal strengths and weights for playback tracks
Fixed issue with stopping MS whilst Primary Server check was in discovery with other MS's
A number of minor improvements and cosmetic fixes for the UI
Experimental camera supportThe release contains experimental support for controlling cameras and having alarms move cameras to point at the incident. We do not recommend the use of this sub-system until it is formally released. |
Distance Travelled UpdateDue to the improvement of the distance travelled settings in the rules, the travelled distance setting is now always positive. Prior to this update the distance was negative (-ve) to indicate a reverse distance and positive (+ve) for a forward direction. With the improvement, the value will now always be positive (+ve). So if you previously had a negative value this must be updated to the positive equivalent. |
Change the content by label macro to filter for other articles / resources related to this one. You can select one or labels in the macro to auto-link other pages.