Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

  • Maximum line of sight detection range of 500m over 360 degrees.
  • Recommended mounting height of 4-5m above the road surface.
  • Standard rotation speed for the CTS350-X radar is 4Hz.
  • Operating voltage: 24V (range 18-30V).
  • Current consumption at 24V:      Nominal - 0.8A      Maximum - 2.2A
  • Ethernet connection of at least 100Mbit/s (auto negotiation)
  • Typically supplied with a 5m power cable and a 5m shielded Ethernet cable (terminated both ends – one with weatherproof shroud), unless otherwise requested

On this page:

Dimensions - Dish and lens models

 

               

 

 Caution Unexpected Power Removal

These radar units use an SD Memory card for operational functions.  These memory devices can suffer corruption if power is removed unexpectedly during key operational stages of use. Users are warned that once power is applied to the unit it should not be removed within the first 2.5 minutes of power on, in order to allow the system to complete its boot cycle. In addition, power to the unit should not be removed during or for 30 seconds after firmware upgrades or configuration changes made from within Vertex. 

 

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.