Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Introduction

The page covers the settings for the Track Correlation feature.

Overview

When there is overlapping radar coverage with correlation enabled, tracks are effectively analysed to establish whether it’s the same target being reported by one or more radars. If the probability of multiple tracks being the same target is greater than the correlation factor, then the track correlation process will remove duplicates. This process ensures track Ids are maintained when targets move from one radar’s coverage to an adjacent one.

On this page:

Track Correlation

  1. Enabled: select to enable Track Correlation.

  2. Correlate Same Sensor Channels: correlate tracks not only between sensors but internally between individual senors channels.

  3. Speed (m/s):

  4. Direction (°):

  5. Distance (m):

  6. Period (s):

Related information

  • No labels

Safety is everything.