Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Introduction

This section covers the necessary hardware, software and general requirements to support the SafeGuard™ Configuration Application.

The SafeGuard™ Configuration Application requires a minimum hardware specification to ensure it runs optimally. These requirements are based on a typical client-server configuration which assumes the client system will be running the User Interface application and the server hardware will be running the remaining services.

System Configuration

For demonstration, trial or small installations where only a single hardware system is being used, the entire software suite has to be installed on the same system. For this reason, these systems must be more capable then when using the typical client-server configuration. Please refer to the stand alone system requirements below.

Network Equipment

The radar can generate a large amount of network data. This data does not vary, so the quantity will remain consistent 24x7. The delivery of this data to the software system is critical because the entire solution is based around real time processing and relies on low latency, reliable data. To this end we recommend only high-end enterprise network equipment. The equipment must be designed for 24x7 operation with high throughput and low latency. In addition we only recommend fully managed equipment to enable easier diagnostics of network issues or performance problems. If you are unsure about your selection of network equipment then please do not hesitate to ask us.

Before installing the SafeGuard™ Configuration Application software you need to ensure you are using the correct operating system and that required system libraries are installed on the system. Certain requirements are common to all modules and others are specific to the features you intend to run. The installer does need these prerequisites to run, however it is strongly recommended that they are installed before using the installer because it can lead to confusion later if the software fails to start due to a prerequisite being missing.

We don't include the prerequisites in the installer for a couple of reasons: firstly they are large and would significantly increase the size of the installer, and secondly, they are updated regularly so we don't want to distribute out-dated libraries as part of the installer. The exception since version 4.9.x is the .NET Core runtime. This is now incorporated into the Witness™ setup routine and does not need to be installed separately.

Contents

Hardware Requirements

Specifications

The key considerations are as follows:  

  • Disk space and access speed: the speed of the internal database will be affected by hard disk speed. Unlike many database applications, Witness™ will typically write more information to the database, rather than read. This means good disk speed is important.

  • Memory (RAM): the system holds quite a lot of temporary data in memory and also the database access library requires additional RAM. The more load on the system, the greater the memory use.

  • Network Bandwidth: the system deals primarily with target/track data and therefore the bandwidth requirements are not large - the amount of data per track is very small (approximately 112 bytes per track) so the total requirement is entirely dependent on the number of targets being tracked. Obviously, as the number of radars attached to the system increases, so does the overall number of tracks. The amount of data generated by each radar is also dependent on its range, and though certain modes on the radar can significantly reduce network bandwidth, use of these settings is governed by specific requirements for each site. We would recommend a RAID sub-system for speed and redundancy. In addition, the size of the storage will dictate how much data can be stored. The level at which space is consumed is entirely dependent on the number tracks going into the database. We would also recommend at least 512MB RAM per Management Server.

Storage

Storage must be suitable for the quantity of data and the length of time it is being stored. This is based on the number of radars and the number of targets being tracked. For example, if the system is recording all track data for two radars monitoring a busy highway then you can expect the database to grow by up to a 1GB a day. The type of storage system should be suitable for the size and required speed of the database and should include hardware redundancy (RAID). Large database installations may require separate hardware platforms with more specialised storage configurations.

Recommended Client Specification

  • Processor: Intel i5 or equivalent @ 3.2GHz or faster.

  • Memory: 8GB RAM minimum, 16GB recommended.

  • Storage: Minimum of 100GB of space.

  • Operating System: Windows 10 x64 Professional.

  • Network connection: 1Gbps Ethernet link.

  • Graphics adapter: 3D accelerated card with support DirectX 11 or above. Minimum of 512MB VRAM. An Intel CPU integrated graphics adapters such as an HD 4000 or above will suffice.

  • Display: Full HD monitor (1920 x 1080) with touch support if required.

Recommended Server Specification

  • Processor: Minimum of Core i7 @ 3.6GHz or faster.

  • Memory: Minimum of 16GB RAM, 32GB recommended for servers hosting the system database.

  • Storage: Hardware RAID with battery support. RAID 5 configuration with a minimum of 3x SATA drives @ 500GB each.

  • Operating System: Windows 10 x64 Professional or Windows Server 2016.

  • Network connection: 2x 1Gbps Ethernet links.

Recommend Standalone Specification

(Demo kits, trials and small site installations)

  • Processor: Minimum of Core i7 @ 3.2GHz or faster (Haswellgeneration or later - 8th Generation CPU recommended).

  • Memory: Minimum of 32GB RAM.

  • Storage: Minimum of 250GB of space (after OS installed).

  • Operating System: Windows 10 x64 Professional.

  • Network connection: 1Gbps Ethernet link.

  • Graphics adapter: 3D accelerated card with support DirectX 11 or above. Minimum of 2GB VRAM. An Intel CPU integrated graphics adapter, such the latest HD graphics will suffice.

  • Display: Full HD screen / monitor (1920 x 1080) with touch support if required.

Storage requirements are dependent on the quantity of data being generated. This is affected by a number of criteria, but the critical factors are the number of radar installed, the number of tracks / targets detected and the length of time the data has to be retained. On a large system which is very busy you might expect the data storage requirements to exceed 20GB per day. On smaller, less active system you would expect it to be around 1GB or less per day. For larger system we would always recommend high quality hardware RAID controllers with enterprise level disk drives.

Windows Edition

Please note that when using the desktop version of Windows, the Home edition is NOT supported. It must be Professional or Enterprise.

Supported Operating Systems

  • Windows 10 x64 Professional

  • Windows Server 2012 R2 Standard

  • Windows Server 2016 Standard (including Core install)

  • Windows Server 2019 Standard (including Core install)

Note that Witness™ 4.0 is now a 64 bit application (x64) so all OSs and associated libraries must also be 64 bit.

Software Requirements

The following software libraries are required and can all be downloaded easily from the internet:

Common Libraries

All systems require the following libraries:

  • Microsoft .NET 4.8 or later (included with latest Windows 10 and Server 2016)

  • Microsoft Visual C++ 2015 x64 Redistributables

  • Microsoft .NET Core 3.1 (included with the installer, no action required)

  • Microsoft .NET 6.0 (version 4.12.x and newer)

General Requirements

The application is currently designed to only run using 100% scaling in Windows. If the PPI display appears to be showing data out of alignment then please check the display scaling.
We do not recommend using any form of hub or non-enterprise network equipment between the radar and the PC running the software. The radar generates a lot of real time data during configuration therefore high quality networking equipment is required to ensure the data is processed and delivered at the expected rate.
The application will work with a laptop track pad, however, we would recommend using a mouse for the optimal experience.

Related Information

  • No labels