Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

All variants in the CIR radar range have 4x 20mm deep M8 tapped holes in the underside, in a 4” PCD arrangement. 4” PCD dictates hole centres with a 71.84mm spacing. Every radar is supplied with a stainless steel M8 fixings pack; it is recommended that these are tightened to between 19 & 22 Nm.

For details of the power and network connections, see Connection Details



Below are downloadable 3D models of the CIR radar unit to support hardware integration in customer applications, and a printable drilling template to simplify preparing any necessary mountings.

  File Modified
  • No labels