Introduction
Entity Timeouts are used to configure the timeouts for actions used in association with specific entities. For example, the arm and disarm actions on both the Breach Line and Areas have timeouts, these values come from this configuration. The timeout options are limited to five and all the options are entered as minutes.
Contents
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Timeouts
To edit the timeouts:
Select Edit.
Enter the values you need. Remember all values are in minutes.
Select Save when complete.
Once you have made the changes these will be reflected in the timeout options for the actions you select, for example the Area arm timeout:
Related Information
| Filter by label (Content by label) | ||||
|---|---|---|---|---|
|