...
Zoom calibration is required to match the magnification of the camera lens to the range of the target. When automatically tracking targets, our software will always maintain the most suitable zoom level based on the size and distance of the target. If your camera works with our standard ONVIF driver, but you are unable to provide us with a device to test, then it may be possible to perform the zoom calibration as part of the on site commissioning. However, without testing there is no guarantee that the camera will respond as expected and we would strongly recommend all non-supported cameras are tested by our development team.
...
The table below shows, at a glance, which camera models have been integrated with Witness™ and the level of integration achieved. Integration is graded as follows:
| Reliable PTZ control and zoom calibration. |
| Reliable PTZ control, zoom calibration and support for additional camera features, such as wiper and lamps. |
| Reliable PTZ control, zoom calibration, additional features and advanced features such OSD and manual override support. |
Make | Model | Protocol | Integration | Notes |
|---|---|---|---|---|
AXIS | P5635-E | ONVIF |
| |
AXIS | Q6045-E Mk II | ONVIF |
| |
AXIS | Q8641-E | ONVIF |
| |
AXIS | Q6215-LE | ONVIF |
| |
AXIS | Q8742-LE Zoom | ONVIF |
| Daylight / Thermal Dual Camera |
Bosch | AUTODOME IP Starlight 5000 | ONVIF |
| |
Bosch | AUTODOME IP Starlight 5000i IR | ONVIF |
| |
Bosch | MIC 7000 HD | ONVIF |
| |
Bosch | MIC 7000 HD WL | ONVIF |
| |
Bosch | MIC 9000i HD (Thermal) | ONVIF |
| |
Bosch | MIC 612 Ti x28 (Thermal) | Pelco D via AXIS Encoder |
| Analogue camera - uses the AXIS for an IP connection |
Bosch | MIC 550 x28 | Pelco D via AXIS Encoder |
| Analogue camera - uses the AXIS for an IP connection |
Bosch | MIC 412 Ti x36 (Thermal) | Pelco D via AXIS Encoder |
| Analogue camera - uses the AXIS for an IP connection |
Bosch | MIC 412 x18 | Pelco D via AXIS Encoder |
| Analogue camera - uses the AXIS for an IP connection |
Bosch | AUTODOME Starlight 5000i IR | ONVIF |
| |
Dahua | DH-PTZ12248V-IRB-N | ONVIF |
| |
Dallmeier | Panomera S8 Topline 87/45 | ONVIF |
| |
Dallmeier | Panomera S8 Ultraline 78/75 | ONVIF |
| |
FLIR | PT140 x35 | FLIR SDK |
| |
FLIR | PT313 | FLIR SDK |
| |
FLIR | PT602CZ | FLIR SDK |
| |
FLIR | PT606Z HD | FLIR SDK |
| |
FLIR | PT606Z HD | ONVIF |
| Does not support camera priority |
FLIR | PT612 | FLIR SDK |
| |
Ganz | LZN-NDNC30X Nautilus | ONVIF |
| |
Geutebruck | G-CAM/ESD-3280 30x | ONVIF |
| |
Geutebruck | G-CAM/ESD-4620 40x | ONVIF |
| |
HIK Vision | DS-2DF883615X-AELW | ONVIF |
| |
Honeywell | HDZ302LIK | ONVIF |
| |
Huawei | IPC6681-Z20 | ONVIF |
| Integrated with F/W IPC V200R003C30SPC232 |
Panasonic | WV-SUD638 x45 | ONVIF |
| |
Panasonic | WV-SW598A | ONVIF |
| |
Pelco | ES6230 | ONVIF |
| |
RedVision | RVXIP 30 IR WL W | ONVIF |
| |
Silent Sentinel | Aeron Ranger LR | Pelco D |
| See note below. |
Sony | SNC-WR632 30x | ONVIF |
| |
360 Vision | Predator HD | ONVIF |
| |
360 Vision | Predator HD x30 | 360 Vision Protocol |
| |
360 Vision | Predator HD x30 Thermal | 360 Vision Protocol |
| |
360 Vision | Predator HD x40 | 360 Vision Protocol |
| |
360 Vision | Predator HD x40 | ONVIF |
| |
360 Vision | Centurion IP | 360 Vision Protocol |
| |
360 Vision | Dome VR HD | ONVIF |
|
| Info |
|---|
Note that due Due to lack of demand, we have now dropped support for analogue cameras which are controlled directly via RS422/485. We still support the analogue protocol Pelco D, but this can only be used through a supported IP encoder. At the moment this is the AXIS range of encoders. More information can be found here: https://www.axis.com/en-gb/products/video-encoders. For a cost-effective solution where you need one encoder per camera, we recommend the M7011: https://www.axis.com/en-gb/products/axis-m7011. |
...