...
To configure the plugin select the Edit Button:
Click the Plugin Enabled tick box:
Configure the Local and Alarm Server IP Addresses:
To add the server mapping click the ➕ button on the right-hand-side of the NVR IP Address:
Enter the NVR IP Address for the NVR:
To map the cameras to the NVR click the ➕ button on the right-hand-side of the Camera Mapping list and then the Camera drop-down to show your list of cameras:
Select the required camera and enter the camera’s IP Address or UUID, and Event ID:
You can then repeat the process to add other cameras as desired:
Click the Save button to save the configuration:
The configured server and camera mappings will be saved:
Configuring the IndigoVision Control Center
...