...
Introduction
These release notes cover ClearWay™ V4.8 and above.
| Note |
|---|
Please note that version 4.8 of ClearWay™ requires a new licence when upgrading from earlier versions. To create the new licence ensure you use the equivalent version of the Licencing Tool. Please speak to the Development team regarding how to upgrade the licence configuration file to work around a UTC time problem that can occur |
Contents
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Version 4.8.0 Build 738 - 25 August 2020
Tracker 4.8.0.166 Release Notes
New Features
Added FLIR PT-606Z ONVIF Camera
TUN-3864 - Added option of pinning video viewers to map layer from the camera
TUN-3883 - Added optional sector based height map to cameras
Improvements
Improved handling of FLIR camera token system
Find dialog supports searching everything of a single type with an empty search
Fixes
TUN-3966 - Fixed layer interactivity handling
Version 4.8.0 Build 732 - 06 August 2020
Tracker 4.8.0.166 Release Notes
Fixes
Fixed issue with onboard upgrade not working correctly
Version 4.8.0 Build 727 - 05 August 2020
Tracker 4.8.0.166 Release Notes
Fixes
Fixed Traffic Analysis plugin sending reports by section when "Send Immediately" selected
Version 4.8.0 Build 726 - 31 July 2020
Tracker 4.8.0.166 Release Notes
New Features
Added zoom factor to video viewer
TUN-3943 - Added default sort option and persistence to sortable columns
TUN-3936 - Added ability for a camera to dwell forever having finished following a target
Fixes
TUN-3938 - Fixed using an operator acknowledge dialog are seeing the occasional failure where the alarm is not acknowledged
Version 4.8.0 Build 724 - 27 July 2020
Tracker 4.8.0.166 Release Notes
New Features
TUN-3885 - Added a system alarm for a bad tracker licence. This works for both local and onboard trackers
TUN-3894 - Added the Clutter Control setting to Tracker Parameters profile setting
TUN-3891 - Added ability to copy an existing user and change the password at the same time through the use of the new user wizard
TUN-3910 - Added SD Factor to the thresholding process
TUN-3919 - Implemented an over-the-wire mechanism to upgrade the onboard tracker using SSH
TUN-3897 - Added a new Dynamic Zoom feature to the cameras. This allows zoom to be automatically adjusted based on the speed of a target
Improvements
TUN-3863 - Added a new camera alignment mode which reformats the camera setting panel
...
| borderColor | silver |
|---|---|
| borderWidth | 1 |
On this page:
...
to show only relevant controls including the video feed from the selected camera
TUN-3869 - Added support for multiple RTSP streams from ONVIF compatible cameras. This allows viewers to be easily configured with different steams available from the camera
TUN-3877 - Added Use TLS option to login dialog. This allows users to change the TLS option at login to match the TLS configuration for the Management Server
TUN-3865 - Replaced entity tree drag and drop with multi select operations
TUN-3878 - Created new change password mechanism
TUN-3873 - Add a global play / pause / stop option (no rewind etc) for file playback so we can trigger all radar to start / stop at the same time
TUN-3892 - Moved the Clear tracks button to first slot on Quick Reports radial menu
TUN-3898 - Removed camera beam overlay for static cameras and ensured static cameras always point towards their fixed field of view (FOV)
Improved the target latching to ensure only Automatic cameras can be tasked
Added Username to latching track update to allow integration plugins to output more details for VMS systems
Fixes
TUN-3874 - Fixed issue with where UI would no longer show tracks
Version 4.8.0 Build
...
711 -
...
22 June 2020
Tracker 4.8.0.144 Release Notes
New Features
TUN-3707 - Added support for the Bosch AUTODOME IP starlight 5000i IR
TUN-3760 - Added support for the Vision 360 Predator x40 ONVIF
TUN-3820 - Added support for the Vision 360 Predator x40 using
...
Vision 360 Protocol. Telemetry control via the 360 Vision protocol is recommended over using ONVIF because it offers more features
TUN-3777 - Added support for the Axis Q8742-LE Zoom
...
TUN-3776 - Added the option to send
...
Traffic Analysis reports on creation instead of being
...
collated. This means TA reports are sent from the Track Engines as they are generated. With this option enabled it is up to the subscribers to collate the all the data to get overall carriageway data.
Added formal support for BVMS, Milestone and Genetec Plugins
TUN-3721 - Added the option to use the harmonic mean to calculate the average speed for the Traffic Analysis report
TUN-3814 - Added a new shortcut to latch a track with a camera by right clicking on the track. This is a user optional feature and is disabled by default
Improvements
TUN-3713 - Updated the Witness Camera Tool to show more camera details and allow absolute position to be sent on demand instead of automatically on
...
user interaction
Added consistent camera mapping configuration for all VMS plugins. This ensures we can support cameras with dual lenses and also support duplicate bookmarks across multiple recorders
Added re-classification rule triggers for ML Classification. These can now be configured as part of the central ML Classification settings
TUN-3578 -
...
Added an option to the radar info panel with the other rotation controls to
...
enable the rotation of
...
the contour area
...
without rotating radar data
TUN-3661 -
...
Added a channel filter to the track recorder so recording can be limited to either a specific tracking channel or the debris channel
Fixes
TUN-3779 -
...
Fixed a problem with missing data in the ICD-002 reports
TUN-3817 -
...
Fixed the issue ICD-002 was reporting transposed SWEREF co-ordinates
...
Fixed
...
an issue which was preventing new carriageway rules from being saved
TUN-3727 - Fixed an issue
...
where the Milestone
...
plugin was trying to
...
access cameras from the server when AdvanceGuard is closing
TUN-3796 - Fixed the UTC / local time display issue for system notes dialog
...
Fixed an issue that was causing the initial rotation of
...
the radar contour area to random jump when not using the mouse wheel
TUN-3768 -
...
Fixed an issue to ensure that camera
...
groups work as expected
...
so they now use the maximum follow time for tracks of the same priority
Fixed
...
a display issue in the Topology Manager, where the Current Ram tooltip was incorrect
Fixed an issue with the False Alarm query not be cleared properly which prevented the heat map displaying when you change colours
Fixed an issue with unlatching cameras that was causing an additional unwanted camera tasking after unlatching a track
| Note |
|---|
Any rules that were created without using the carriageway wizard in older versions will need to be deleted and re-created in order to fix the issue with them not saving after an edit. |
| Info |
|---|
Due to the improvements for the VMS plugins, we recommend you check any existing installations using the Milestone, BVMS or Genetec plugins after the upgrade to ensure the camera mapping is configured as expected. |
Version 4.8.0 Build 677 - 05 May 2020
Tracker 4.8.0.142 Release Notes
Fixes
Fixed an issue with integration plugins not being able to create bookmarks or alarms in external VMS systems
Version 4.8.0 Build 675 - 27 April 2020
Tracker 4.8.0.142 Release Notes
New Features
TUN-3672 - Added title bar to entity config panel
TUN-3675 - Added optional basic target data to video viewer overlay
Installer can now install services using domain credentials
TUN-3621 - Moved UI layout configurations to database
TUN-3636 - Added disk space stats to topology view
Improvements
Services will now by default be installed using TLS for service to service communication
Trackers will now by default be configured from new to use TLS for onboard communication
TUN-3676 - Reduced minimum size of video viewer and added automatic aspect ratio resizing
TUN-3698 - Ensured only an administrator can import a license
TUN-3632 - Added check for image dpi in background image importer
TUN-3644 - Ensured both AG and CW will have the same default threshold window size
TUN-3664 - Ensured the User and Engineer accounts will by default be disabled
TUN-3671 - Ensured that default mechanical delay is 800ms for all cameras
TUN-3673 - Ensured the cameras PTZ controls can be hidden via a video viewer config option
TUN-3585 - Added an expirable area to Highways that contains the viewport of a display
TUN-3605 - Added an ICD-001 command to set track filter view ports in Track Engines
Fixes
TUN-3696 - Fixed issue with camera lock going home after time out
Fixed camera/target selection logic to correctly choose the closest target to a camera
Fixed ML Classification configuration not appearing in global settings
| Info |
|---|
Due to the layout settings for the UI now being stored in the users settings in the database, the UI layout may reset to defaults after an upgrade |
...
Related
...
Information
| Filter by label (Content by label) | ||||
|---|---|---|---|---|
|
...
|
...
|