Page Comparison

Introduction

These are the primary global settings for the software system. They include policy settings for user security, database retention limits, system profiles and database backup options. Please refer to the documentation before making changes because these settings can significantly alter the behaviour of the software,.

Contents

...

...

Disable System Scheduler: This prevents the scheduler from running which means all scheduled jobs are suspended until this this option is cleared. See Schedules for more information.

Customer Incident Report Logo: This option allows customers to upload their own logo. The file should be no more than 300x200 pixels at 96 dpi resolution. Once saved, the file will be stored in the database and the file name will be displayed in the text box. The new logo will be displayed on the top right of the Incident Report. The logo can also be cleared by the user by clicking the clear icon. If the file name is empty then the Navtech Radar logo will be displayed by default. https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/775913552/Alarms+Queries#Incident-Report

...

Track Check Period (ms): How often the system checks for expired tracks.

Maximum Sightings: Maximum number of sightings stored of a single track - after which the system stops recording sightings.

...

Last Sightings: Number of sightings guaranteed to be recorded at the end of a track. This guarantees the last X sightings will be recorded, in the event of the max sighting limit being hit. This is also applied when the recording frequency of sightings is lower, due to the target being stationary.

Debris (and IFF) Movement Limit (m): Distance of movement below which debris (and IFF tracks) will not be recorded.

Use Radar NTP Time: This is the Network Time Protocol data sent with the tracks from the radar. NTP is a networking protocol for clock synchronisation between computer systems over packet-switched, variable-latency data networks.

Tracker SSH Start Delay (ms): This sets the amount of delay after the Track Engine has connected to the Onboard Tracker, before we connect to the tracker and radar via SSH to check the status and retrieve logs.

Backup Radars On Shutdown: If a track engine has a backup track engine configured, and this setting is selected, then the system will automatically backup the radars when the track engine is shut down.

Central Tracker Licencing

...

Capture Radar Logs Mode: There are two options:

Automatic: After the Tracker SSH Start Delay the system will try to download logs from the radar and onboard tracker.

Manual: The automatic setting is not selected and you will have to manually retrieve the logs or run a schedule for capturing the logs. Please refer to https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/211190045/Radar+Actions#Actions and https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/206537165/Schedules#Common respectively.

Enable Track ID Correlation: If enabled, the system will attempt to correlate an active track with another track that has recently been lost by checking the distance and speed. If the tracks match, it combines the active track with the old one so that it has the same Track ID. If no new tracks match the lost track within a given timeframe, it will expire and the feature will stop testing new tracks for a match.

Central Tracker Licensing

...

Disabled: This disables Central Tracker Licensing, which means that the Per Tracker Licensing will be operational. For more information, please refer to this information: Per Tracker Licensing

Enabled: This is where you can enable central licensing by selecting the tick box. It is documented here: Centralised Tracker LicencingLicensing.

Alarm Options

...

Audible Alarm: Select to have a sound emitted when a system alarm is active.

Silence On All Clients: When disabled, clicking the Silence Alarm button will silence the alarm immediately but only on that client. If enabled, an alarm update is sent to the management server with an alarm silence flag set to true. When the next alarm list is published by the management server and processed, each of the clients will check if the incoming alarm has been silenced, and if so, will silence the alarm.

Custom Threat Sound: The sound clip emitted for a threat alarm (this supports most common sound formats including .mp3 and .wav).

...

Auto Acknowledge: Select if alarms are automatically acknowledged when they are cleared. If auto-acknowledge is disabled, then the operator is expected to acknowledge all alarm incidences. 

Max Pending Acknowledgements: The maximum number of alarms to keep when waiting for acknowledgement. Older alarms exceeding this value will be auto acknowledged. This option is hidden when Auto Acknowledge is selected.

Require Acknowledge Details: When selected this will force a user into adding a note to acknowledge an alarm. This option is hidden when Auto Acknowledge is selected.

Clear Alarm Minimum Role: The minimum role in the role hierarchy that has permission to clear alarms. Any roles below this in the role hierarchy will not be able to clear alarms.

...

Threat Area Colour: Select the colour to be flashing in an area when an alarm with a severity of threat has been triggered.

Save Still From Image Server: The Image Server can save a still image if this setting is enabled.

Acknowledge Options

...

Alarm Acknowledge Description: This gives the user the option to enable or disable Alarm Acknowledgements for Intruder, Wildlife, Nuisance or Unknown alarms.

...

...