...
| Info |
|---|
For customers and integrators intending to use the Integration Simulator, the documents assume a reasonable working knowledge of network communication. They are targeted at technical teams, typically with software development skills, who are integrating the output from Witness into external systems. |
| Note |
|---|
If the AdvanceGuard® or Sea360® Integration Simulator software won't start then you will need to delete the Security Integration Simulator folder. It should be located here: %ProgramData%\Navtech\Security Integration Simulator. If the ClearWay™ Integration Simulator software won't start then you will need to delete the Highways Integration Simulator folder. It should be located here: %ProgramData%\Navtech\Highways Integration Simulator. The Integration Simulator should then start and create a new default config. |
...
The simulation plugins are specific to the product, so ClearWay™, AdvanceGuard® and AdvanceGuard® Sea360® have their own. These plugins simulate the Witness functionality associated with these products, such as raising alarms or generating tracks.
...
Click the Add Alarms button:
The alarm details field will be enabled so you can edit the alarm details in the Security Alarms section, which will then populate the Live Alarms List beneath it (both highlighted):
You can then add more alarms by repeating steps 1 to 2.
Next, select Send Alarms to publish the configured Active Alarms List:
Once you have sent the alarms, there is an alarms sent message displayed in the Log Panel, highlighted above.
...
Select the alarm you wish to update; you can select all alarms by selecting the checkbox in the column header or select individual alarms:
Change the severity (this is the only property available to change after you have sent an alarm):
Click Send Alarms.
...
Select the required alarms from the Active Alarms List:
Select the Clear Alarms button:
Alarms will be marked as cleared in the list and alarm updates will be automatically published:
| Info |
|---|
Alarms must have been sent before they can be cleared. |
...
Select the cleared alarms you wish to acknowledge.
Select Acknowledge Alarms.
The alarm will be acknowledged. Alarm updates will be automatically published:
| Info |
|---|
Alarms must have been cleared before they can be acknowledged. |
...
Select the alarms that wish to delete and click the Delete Alarms button:
The system will delete the selected alarms, and remove them from the Active Alarms List.
...
Select Configure Radars to open the Configure Radars dialogue. Here you can choose the number of radars you need:
Click OK.
This will delete all existing radars and create new ones until the desired number is reached. Any Integration Plugin tied directly to radar or radar entity updates will be affected by this.
...
Select Configure Carriageways to to open the Configure Carriageways dialogue. Here you can change the number of carriageways and sections per carriageway:
Click OK.
This will recreate the carriageways as required. All carriageways will be created with 4 lanes and with the default rules; Debris, ERA, Person, Queue, Reversing Vehicle, Slow Vehicle and Stopped Vehicle.
| Info |
|---|
By default, carriageways are generated with settings that include an 11 m/s queue threshold, 16 m/s heavy traffic density and a track density queue of 4. For Integration Plugins that are able to output section queue and heavy traffic flags, these criteria will need to be met. |
...
Select Save Configuration to save the current configuration to file:
You will receive a log message indicating a successful save and where the configuration file has been saved to. For example; %ProgramData%\Navtech\Highways Integration Simulator\HighwaysSimulatorConfig.xml
...
Ensure the Sections and Rules tab is open:
There will be a list of the sections you have configured with the rules.
You can select sections and the rules that you wish to apply by selecting their check boxes:
In the example above, Section 1 of Lane 1 has been chosen with a variety of rules. The Auto Acknowledge check box has been selected by default.
...
Click the Add Alarms button:
This will add each of the rules for the section to the Live Alarms List as highted above.
Selecting the check box on the Live Alarms List toolbar will select or deselect all of the checkboxes below it:
Alternatively, you can select individual rows in the list.
...
Click the Clear Alarms button; you can select all alarms by selecting the checkbox in the column header or select individual alarms:
As the Auto Acknowledge check box has been selected then clearing the alarms will also acknowledge them as in the example above.
If the Auto Acknowledge check box has not been selected:
Clicking on the Clear Alarms button will clear the alarms but not auto acknowledge them:
...