Introduction
ICD-001 is a network communication protocol based on XML. The protocol is used over standard TCP/IP client-server connections.
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Overview
When Witness generates events, such as alarms, or processes targets, it passes all this information to the Integration Manager. The Integration Manager is then able to use loaded plugins such as ICD-001 to convert this information into a suitable data format to send to external systems. In this case the plugin converts the data to XML message which are transmitted over a TCP/IP connection.
...
The data is transmitted as the events occur, leading to real time reporting.
Installing the ICD-001 Plugin
Witness supports integration with many different types of external systems through the use of plugins. These are stand-alone software libraries which are dynamically loaded by the Integration Manager and contain code which knows how to convert the Witness data into the required format for the external system. Navtech Radar can easily develop bespoke plugins to interface with a specific type of equipment or application, however ICD-001 has been developed to provide a comprehensive communication protocol which is based on open standards in order to make it as easy as possible to integrate with a large number of different systems.
| Tip |
|---|
The plugin can be selected during setup and will automatically be installed in the correct location. |
When installing Witness, in the Choose Components page of the Witness Setup wizard, open Integration Plugin options and select ICD001:
...
When Witness generates events, such as alarms, or processes targets, it passes all this information to the Integration Manager. The Integration Manager is then able to use loaded plugins such as ICD-001 to convert this information into a suitable data format to send to external systems. In this case the plugin converts the data to XML message which are transmitted over a TCP/IP connection.
...
The data is transmitted as the events occur, leading to real time reporting.
Configuring the ICD-001 Plugin
When the plugin is installed and licensed, a plugin configuration with default settings is automatically generated. The settings can be viewed and edited by enabling the Config Function, then selecting the plugin in Integration Configurations, within the Configuration Tree. Configuration settings will then be available in the Configuration Panel. :
...
| Info |
|---|
Once you have made changes to the plugin configuration and committed the changes by saving, the plugin will automatically restart itself based on the new configuration. Note that any connections to 3rd party systems will be dropped during this restart. |
The setting options are as follows:
Enable Plugin Enabled: When enabled the plugin will start and will always start when the Witness system starts. When disabled the plugin will stop and will not start until re-enabled.
Plugin Name: User friendlyname of the plugin.
...
| Filter by label (Content by label) | ||||||||
|---|---|---|---|---|---|---|---|---|
|