Page Comparison

A radar demonstration kit will be provided in a robust box as shown below If the box is secured by a padlock, the code to release the padlock will be the four digit

radar serial number.

If you need this number, please contact industrial.automation@navtechradar.com.

Image Added

1. Navtech Radar model CIR-DEV or CIR-DEV-X
   

1. The model variant most suited to your proposed application will be discussed in advance of any demonstration kit being shipped to you. Typically, the CIR-DEV-X model is supplied for applications where the radar will be mounted at >2m above ground level, in situations where the radar coverage of objects on the ground is required, with the minimal possible blind-spot. The CIR-DEV model is typically supplied for applications where the customer is looking to implement a collision avoidance system, or using the Navtech Radar inbuilt SafeGuard application.
   

2. 5m radar power and network leads
   The supplied network lead is terminated with an RJ45 connector at either end, with a radar-specific shroud on one end, to ensure a weatherproof connection

1. , the supplied power lead is terminated with a radar specific power connector at one end, and bare (tinned) wire at the other.
   

2. Mains 24V power supply
   This is supplied boxed, but unterminated - attach a mains plug suitable for your region and connect the radar power lead to the power supply output if required.
   

3. Fixings pack
   A selection of M8 stainless steel fixings will be supplied within the demonstration kit to secure the radar within a customer’s test environment.
   

4. Radar target/reflector
   The supplied corner-reflector is sized according to the radar’s wavelength to provide a radar-cross-section of 25m². The target is fitted with a 5/8” thread to allow easy mounting to a standard tripod.
   

5. Paper documentation
   The envelope within the demonstration kit will contain wiring/connection details for the unit, along with a printed copy of the radar’s current configuration.