...
There are several firmware controls available to you. These are available within the Action Menu and Controls highlighted in the two images below:
...
There are four or five options within the Action Menu.
...
To confirm the shipping halt, enter the code in the field provided and click the Halt button.
Recalibrate RF Health
This process will recalibrate the radar. A confirmation message is displayed.
To recalibrate click the Recalibrate button.
Recalibrate Accelerometer
To recalibrate the accelerometer click the Recalibrate button:
| Info |
|---|
If the radar does not have an accelerometer fitted the Recalibrate Accelerometer option will not be available. |
Reboot
This process will reboot the radar. A confirmation message is displayed.
To reboot click the Reboot button.
Field Reset
This process will reset the system, and return the radar to it’s operational default settings whilst maintaining the IP Address. Therefore, a warning message is given.
To confirm the reset, enter the code in the field provided and click the Reset button.
Upload Licence
...
You will need to choose the new firmware file to upload by selecting the Choose File option:
This will open File Explorer to enable you to locate it and click Open:
The file will then be displayed in red next to the Choose File button. Click the Upload button:
A progress bar will be displayed:
The system will then check the file and then asks to proceed. To do this click the Apply Update button:
The system will then update, and then reboot. You should wait and do not power off until the firmware upgrade has completed.
Once the system has rebooted then you can check the footer on the Vertex homepage has the correct version number:
Delete Licence
...