...
Care should be taken with solvent based aerosol sprays to avoid contact with the eyes or excessive inhalation of fumes. Especially in enclosed areas or poorly ventilated areas. Gloves and a mask and goggles should be worn.
A safety sheet is available for Chesterton© 740 at this weblink. – or visit www.chesterton.com and use the search facility to locate '740 rust guard'.
To apply Chesterton© 740 Aerosol product.
- Attach the power and data connectors to the radar. Checking their surfaces are free from dirt, oil, grease and moisture.
- If the radar has a vent plug attached temporarily cover or mask the vent so that when spraying the connectors no spray enters the vent plug.
...
- Evenly apply the spray to the connectors. Observing the Health and Safety guidelines while doing so.
...
- While drying residual product can be removed with a cloth. After drying a degreaser can be used to remove the product.
...
- Remove the temporary vent plug mask/cover to allow the plug to breathe.