...
Output Format: Select the Navigation Output Format. The Point Mode output is an alternative to the standard Nav Mode output.
Nav Mode: This is the default setting. Nav mode outputs data over TCP/IP to the client.
Point Cloud:Point Cloud mode outputs data over UDP.
IP Address: If Point Cloud has been selected as the Navigation Output Format, then you will be able to amend the IP Address. This is used in conjunction with the Sensor Port parameter and defines the endpoint that the UDP messages are sent to.
| Info |
|---|
If the IP Address specified is a multicast address (that is, an IP address between 224.0.0.1 and 239.255.255.255) this will enable multicast sending of the Point Cloud data to that address. |
Sensor Port: This field cannot be edited here. This field echoes the Sensor Port field shown on the FFT Data. In general we do not recommend customers change this port, however, If the port must be revised, it can be edited via the Sensor Port in FFT Data.
Nav Mode: This is the default setting. Nav mode outputs data over TCP/IP to the client.
...
the Point Cloud data to that address. |
Sensor Port: This field cannot be edited here; it . This field echoes the Sensor Port field shown on the FFT Data section of the System Configuration page. In general we do not recommend customers change this port, however, If the port must be revised, it can be edited via the Sensor Port in FFT Data. Please refer to: https://navtechradar.atlassian.net/wiki/spaces/PROD/pages/2265514016/User+-+System+Configuration#Changing-the-FFT-Data.
...
Select the drop-down arrow in the Output Format field.
There are two options; Nav Mode and Point Cloud:
You can then amend any available parameters as desired and click Apply. (If you have selected Point Cloud there will be an additional IP Address option.
A confirmation message will be displayed. Select Commit Changes:
A Data Applied confirmation message will be displayed:
You will then need to reboot the system for the Navigation Output Format changes to take affect:
Click Reboot:
Download and Upload Options
...