...
This allows you to configure individual cycles which have a cycle length that can be set in minutes.
CarriagewaysCycleLength: Enter This sets the name length of the carriageway you wish to use for the simulation.CycleLength: This sets the length of the cycle in minutescycle in minutes.
Carriageways: This allows you to configure individual carriageways for the cycle.
Name: This sets which carriageway will use the following configuration for the alarms.
EmergencyAreaAlarms: This sets the alarm values for the emergency areas (Lane 0). If this is not set, Lane 0 is assumed to be a live lane.
...