Page Comparison

...

• Milestone XProtect 2016 Professional or higher

• Version 2016, 2016 R2 or 2019 R1

• Edition Professional / Corporate or higher

• Basic User must be set up for a Witness system user with full camera permissions

• The Modern Browser plugin (Chromium) is required to host the AdvanceGuard AdvanceGuard® or Sea360® Web UI

...

• The Witness installation needs to be licensed to use the Milestone plugin and the required number of cameras

• The Milestone plugin needs to be installed

• At least one camera must be configured to generate bookmarks

• The Mobile Server must be installed and licenced to use the AdvanceGuard AdvanceGuard® or Sea360® Web UI within the XProtect Smart Client

...

1. Ensure you have a Witness user and a dedicated Witness Role in the Milestone system.
   

   Image RemovedImage Added

   Image Removed

   
   

   Image Added

2. Ensure that the Witness user has been allocated to the Witness group.

3. Select the Witness role and select the Overall Security settings. Select Cameras and ensure that neither Full Control or Read is allowed, but allow all the bookmark options:
   

   Image RemovedImage Added

4. Select Alarms and ensure all options are enabled:
   

   Image RemovedImage Added

5. Save your changes.

6. Select the Device settings for the same security role and on the cameras which you want to appear in Witness, select the Read permission:
   

   Image RemovedImage Added

7. By default all other cameras should not have the Read permission enabled and therefore will not appear in Witness.

8. Save the settings.

...

1. Under the Live tab, drag and drop the available cameras into the viewing slots.
   

   Image RemovedImage Added

2. The UI Stream and Camera(s) will be viewed concurrently.
   

   Image RemovedImage Added

3. Use the Playback tab to review alarms, and search through all recorded video.
   

   Image RemovedImage Added

4. Alarms can be managed and reviewed under the Alarm Manager tab.
   

   Image RemovedImage Added

...

1. Open up the Network explorer, OR type the XProtect Web Client's address directly into the web browser, of any computer connected to the local network.
   

   

2. Input the User username and password.
   

   Image RemovedImage Added

3. The Live tab will have all camera views displayed.
   

   Image RemovedImage Added

4. The Investigate tab is a simplified Playback, in order to search through the recorded video.
   

   Image RemovedImage Added

5. The Alarms tab lists all alarms, but the list can be filtered to specific parameters.
   

   Image RemovedImage Added

XProtect Client Plugin

The XProtect Client Plugin is a separate plugin designed by Navtech, to be utilised with the Milestone product. It is used with the XProtect Client application to automate certain actions for the operator. This includes automatically displaying relevant video feeds in response to an operator selecting a target in AdvanceGuard® or Sea360®. In order for the XProtect plugin to work correctly then each operator must have the same username in both Milestone and AdvanceGuard® or Sea360®.

To use the feature, the same operator must be logged into both the Milestone UI and AdvanceGuard®. They can select (latch) tracks in the AdvanceGuard® or Sea360®, and these tracks will then be followed by cameras controlled by Milestone and the relevant video stream will be displayed in the Milestone client UI. Latched tracks will be highlighted in the AdvanceGuard® or Sea360® UI which all users can see, however, the video feeds for latched tracks will only be displayed within the Milestone UI of the user who selected them.

...

• AdvanceGuard® v4.10.0.747 or higher, or Sea360® v1 or higher.

• Milestone XProtect / Siveillance Server 2014 or higher

• Milestone XProtect / Siveillance Client 2016 or higher

...

This is the Setup Procedure for the Milestone XProtect Client Plugin for AdvanceGuard® or Sea360®.

1. Copy the Tungsten.Integration.Milestone.Client.Plugin folder from the management server install or the UI install in the plugins folder: %ProgramFiles%\Navtech Radar\Witness\Plugins\Tungsten.Integration.Milestone.Client.Plugin onto each pc that you wish to use the Milestone Client, at this location: %ProgramFiles%\Siemens\Siveillance VMS Video Client\MIPPluggins
   

   Image RemovedImage Added

2. The plugin can be verified in the client by clicking help>about:
   

   Image RemovedImage Added

3. Then add these permissions:
   

   Image RemovedImage Added

...

Related Information

...