Introduction
...
Track Check Period (ms): How often the system checks for expired tracks.
Maximum Sightings: Maximum number of sightings stored of a single track - after which the system stops recording sightings.
...
Use Radar NTP Time: This is the Network Time Protocol data sent with the tracks from the radar. NTP is a networking protocol for clock synchronisation between computer systems over packet-switched, variable-latency data networks.
Tracker SSH Start Delay (ms): This sets the amount of delay after the Track Engine has connected to the Onboard Tracker, before we connect to the tracker and radar via SSH to check the status and retrieve logs.
...
Enable Track ID Correlation: If enabled, the system will attempt to correlate an active track with another track that has recently been lost by checking the distance and speed. If the tracks match, it combines the active track with the old one so that it has the same Track ID. If no new tracks match the lost track within a given timeframe, it will expire and the feature will stop testing new tracks for a match.
Track ID Correlation is available in AdvanceGuard® and ClearWay™, and should not be confused with Track Correlation, which is only available in AdvanceGuard®.
Central Tracker Licensing
...