...
| Info |
|---|
If the IP Address specified is a multicast address (that is, an IP address between 224.0.0.1 and 239.255.255.255) this will enable multicast sending of the Point Cloud data to that address. |
Sensor Port: This field echoes the Sensor Port field shown on the FFT Data. In general we do not recommend customers change this port.
...
Select the drop-down arrow in the Output Format field.
There are two options; Navigation Mode and CA-CFAR Mode:
You can then amend any available parameters as desired and click Apply. (If you have selected CA-CFAR Mode there will be an additional IP Address and Port options.
A confirmation message will be displayed. Select Commit Changes:
A Data Applied confirmation message will be displayed:
You will then need to reboot the system for the Navigation Output Format changes to take affect:
Click Reboot:
...