Page Comparison

...

...

Version 4.12.2 Build

...

1101 - 05 February 2024

Orca Tracker 4.12.0.329 Release Notes - NavOS 32-Bit Tracker 4.12.0.329 Release Notes - NavOS 64-Bit Tracker 4.12.0.329 Release Notes

...

• TUN-6482 - Updated MongoDb to version 5.0. This version pushes the end of support date back to October 2024.

• TUN-6482 - Improved the Log Rotate install script to avoid raising errors when trying to remove a scheduled task that does not exist.

Fixes

• Fixed a minor issue with the SSH connection for fetching logs on Orca radar.

...

• TUN-6377 - Improved exception logging for the tracker upgrade manager to include the IP address of the device being upgraded.

• TUN-6239 - Improved manual radar log capture UI notification to indicate if a capture was unsuccessful on any given radar.

• TUN-6383 - The Web Client UI now supports a splitter to enable users to adjust the relative space allocated to both the schematic and the bottom information panel.

• TUN-6422 - When using the OpenWeather service plugin, the current weather state, wind speed, temperature and weather station location will be displayed in the plugin configuration panel.

• TUN-6423 - When using a weather service plugin, there is now a user option available to display the current weather state and temperature in the application’s main title bar.

• TUN-6445 - Improved the alarm categories so the tracker health performance alarm message is more meaningful.

• TUN-6447 - Security has been improved on the Web Client UI to ensure it can’t be opened in an iFrame. This prevents scenarios where the client can be inserted into another application / site.

• TUN-6476 - Security has been improved on the Web Client web server and on the application inter-process communications. All certificates have been updated to use the latest, more secure cryptographic hashing algorithms, Where available all connections will use TLS1.3 but no lower than TLS1.2.

• TUN-6478 - Security has been improved on the Web Client UI to prevent the browser remembering previous usernames in the login dialog. This will forces users to always manually enter their username and password.

• TUN-6480 - Updated MongoDb to version 4.4.28. This version supports improvements to replication including a more efficient synchronisation method and a recovery mechanism that allows initial synchronisations to resume in the event of a minor network interruption.

• TUN-6485 - Security has been improved by updating all dependent packages which at the point of release has resolved all known vulnerabilities in these dependencies. This has also brought all the packages inline with the latest .NET 8 technology stack.

Fixes

• TUN-6396 - Fixed an issue with the tracking area list in the channel which was allowing multiple entries to be selected and removed which resulted in an exception. The logic has been changed to only allow a single entry to be removed at a time.

• TUN-6411 - Fixed an issue where an incorrectly formatted CSV file caused the radar import feature to lock up.

• TUN-6464 - Fixed issue manipulating lane nodes when stacking lanes on top of one another on the carriageway. The top node can now always be manipulated.

• TUN-6509 - Fixed the Track Correlation query to ensure it works with both lost and stale tracks. This overcomes issues when track correlation is being used.

• Fixed the log rotate script which is installed as a Windows Scheduler Task on all database servers. This now works as expected and also supports database authentication. Due to complications with updating the previous script, this updated version will install as a new task and the old task will be removed. Please refer to the Database Authentication for further information on how to implement authorisation with this scheduled task.

• Fixed the process checker for Helvellyn - this now correctly enforces the restriction that only a single UI can be run on the same physical system even if multiple users are logged in concurrently.

...

• TUN-5876 - Added a password complexity check at login to force users to change passwords if their group has been changed and with it their required password complexity.

• TUN-6101 - Changed the default network cache time to 500ms for the VLC video viewer.

• TUN-6196 - The internal queues which are used extensively for handling real-time data have been completely revamped to improve performance and ensure they can never shut down by accident. In addition, logging has been added to all queues so should any issues occur, they are captured.

• TUN-6230 - Improved the database logging to provide better information on issues relating to a replicated database setup.

• TUN-6304 - Added the KTS model to the radar model list.

• TUN-6305 - Improved the Tracker Manager (TE) so it provides better logging during start up and stopping.

• TUN-6360 - Added a rotation display label to the PPI windows which shows when the display is being rotated, In addition, added a shortcut key to revert the rotation of any window to zero (Ctrl-Shift-Down Arrow).

Fixes

• TUN-6043 - Fixed the issue where pinned camera viewers were rotating with the PPI.

• TUN-6060 - Fixed an issue where tooltips were allocated to the wrong fields in the camera group settings.

• TUN-6109 - Fixed an issue where the System Mode displayed in the main window title bar was getting out of sync with the active mode after a UI disconnect / reconnect to the Management Server.

• TUN-6204 - Fixed the user track visibility settings so the Breaking Rule option works as expected.

• TUN-6232 - Fixed the issue with the height map where the grid lines where not showing.

• TUN-6278 - Fixed the playback track logic so that Mark as Lost works as expected.

• TUN-6279 - Fixed the issue where users could not log back into the web UI after their password had been changed.

• TUN-6287 - Fixed an issue with the radar bulk edit feature which was preventing the SD Factor from being changed.

• TUN-6288 - Fixed the issue which was preventing a camera returning home or being re-tasked for automatic following the completion of a manual latch.

• TUN-6289 - Fixed the issue which was preventing the floor capture from multiple radar using the radar bulk edit form.

• TUN-6293 - Fixed an issue that allowed certain schedules to be created without entering all the required data, such as the camera selection for the White Light schedule.

• TUN-6295 - Fixed an issue which allowed schedules to be manually triggered with an active edit lock in place.

• TUN-6297 - Fixed an issue where the radar bulk edit feature was not honouring the edit lock and allowed duplicate concurrent actions such as floor captures.

• TUN-6299 - Fixed an issue with Image Server where not all resources were being disposed correctly on shut down.

• TUN-6353 - Fixed an issue with the radar bulk edit feature which was always allowing the Slow Decay to be edited even when not selected

• TUN-6371 - Fixed the issue where the PPI rotation was not being saved and restored after a restart of the UI.

...

• TUN-5510 - Added the ability to raise system alarms in the event that the Track Engine encounters a high number of disconnects from a tracker within a specified time frame.

• TUN-5602 - A new Windows Task Scheduler script is added by the installer on all database servers. This script will force a log rotate on the database every 24 hours.

• TUN-5876 - Added a password complexity check at login to force users to change passwords if their group has been changed and with it their required password complexity.

• TUN-5959 - Added the ability to select specific lanes for TA.

• TUN-5960 - Added ability to record and identify tracks that have been processed by TA.

• TUN-5970 - Mobile Client (SA2) now honours the Allow Alarm Clear permission setting.

• TUN-5983 - Added the FPGA version number to the radar summary list and associated export data.

• TUN-5994 - Improved TA configuration editing to support in-place editing in place of the pop-up dialog.

• TUN-5998 - Added support for zero width lanes across all of the carriageway.

• TUN-6037 - Enabled the ability to use both minimum and average track sighting size for TA processing. Based on historic data analysis, minimum size is now the default.

• TUN-6039 - Improved the TA minimum sighting logic to ensure all sightings are included in the size aggregate measurement regardless of the minimum sighting setting.

• TUN-6063 - Improved area detection for tracks to avoid any area processing on disabled areas. This primarily impacts areas used for queue and alarm suppression.

• TUN-6096 - Added ability to select the aggregate method for size in the TA configuration. Users can choose between minimum or average. Average has been maintained for backward compatibility, however based on recent testing, minimum appears to give more consistent results.

• TUN-6101 - Changed the default network cache time to 500ms for the VLC video viewer.

• TUN-6172 - False Alarm filters have been improved for direction and time filtering to ensure scores are based on how close the track being checked is to the most common FA groupings.

Fixes

• TUN-5953 - Fixed the tooltip on the Play Video button.

• TUN-6010 - Fixed the carriageway statistics graph not showing data lines correctly.

• TUN-6013 - Fixed invert mode for carriageway rules nearby queues.

• TUN-6060 - Fixed incorrect tooltips being applied to the wrong fields in the Camera Group form.

• TUN-6067 - Fixed TA output values for ICD-001, NTZA & OPC plugins to reflect the selected size option (minimum or average).

• TUN-6126 - Fixed Suppress New feature so supports all rule types including track-based rules.

• TUN-6176 - Fixed colour picker on the POI bulk edit form.

• TUN-6180 - Fixed an unhandled exception when applying a new licence after creating one more carriageways.

• TUN-6181 - Fixed missing alarm filters on the Alarm Dashboard.

• TUN-6273 - Prevented POI Groups being created with an empty name.

...