...
This rule demonstrates the ability to control lighting using the External Trigger actions. These actions can trigger relays if the system has been configured to use the ADAM 6060 I/O device. This configuration is based on the Area Movement Rule and combines an area check with a timer back off, which means the lights remain active for as long as a track is in the area with an additional time out if required. As soon as the track leaves the area then the timer will count down and once expired the lights will be automatically switched off.
...
Here, if a target enters a configured area, then a time based trigger is activated, a camera follows them and three lights turn on for a set length of time (in this example, 60 seconds).
...
Nodes
Input
Track Sighting Inputhttps://navtechradar.atlassian.net/wiki/spaces/TUN/pages/1874853893/Rule+Inputs#Track-Sighting-Input
...
Classification Check https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/1866498140/Rule+Checks#Classification-Check
This checks that the target is a person:
...
Area Check https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/1866498140/Rule+Checks#Area-Check
...
Time Link https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/1866498140/Rule+Checks#Time-Link
Sets the Lights lights to turn on for 60 seconds:
...
Camera https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/1874854150/Rule+Actions#Camera
...
PPI Example
Here the target is approaching the configured courtyard area (encircled with an orange perimeter):
...
Once the target has entered the area then the trigger is activated; a security alarm notification is given, a camera follows them and the three lights will turn on for a set length of time (in this example, 60 seconds):
...
Video
The following video demonstrates how to configure a Light Control Rule based on an Area Movement Rule:
...
Related Information
| Filter by label (Content by label) | ||||||
|---|---|---|---|---|---|---|
|