...
This page covers the Modbus configuration. This link has more information regarding the Modbus Protocol: https://modbus.org/specs.php.
We can inform clients using the Modbus over TCP Protocol, which links the radar to a client, and can trigger alarms. This works in conjunction with the SafeGuard™ Lite application. This is an optional feature that is subject to it’s own software licence.
...
Table of Contents | ||||||
---|---|---|---|---|---|---|
|
...
Modbus
...
Modbus Mode
...
This is the data output mode.
...
None: Disabled
...
Master: The radar will pole other devices that are operating as a slave.
Slave: The radar acts as a server and makes alarm data available to the Modbus master.
...
Address: This is the IP Address of the slave
...
.
Port: This is the port used by Modbus in order to connect to the slave.
Health Offset: This is the register offset used by Modbus.
...
Slave: The radar acts as a server and makes alarm data available to the Modbus master.
Port: This is the port used by Modbus in order to connect to the slave.
Health Offset: This is the register offset used by Modbus.
Relay: The radar will output nav mode area alarms via an Adam Relay unit instead of using Modbus.
Info |
---|
The Adam relay is accessed via TCP/IP; its configuration (IP address and port) are on this page: User - Radar Configuration. |
...
Related Information
Filter by label (Content by label) | ||||||
---|---|---|---|---|---|---|
|