Page Comparison

...

1. To confirm the shipping halt, enter the code in the field provided and click the Halt button.
   

   Image RemovedImage Added

Recalibrate

This process will recalibrate the radar. A confirmation message is displayed.

1. To recalibrate click the Recalibrate button.
   

   Image RemovedImage Added

Reboot

This process will reboot the radar. A confirmation message is displayed.

1. To reboot click the Reboot button.
   

   Image RemovedImage Added

Field Reset

This process will reset the system, and return the radar to it’s operational default settings whilst maintaining the IP Address. Therefore, a warning message is given.

1. To confirm the reset, enter the code in the field provided and click the Reset button.
   

   Image RemovedImage Added

Upload Licence

...

1. You will need to choose the new firmware file to upload by selecting the Choose File option:
   

   Image RemovedImage Added

2. This will open File Explorer to enable you to locate it and click Open:
   

   

3. The file will then be displayed in red next to the Choose File button. Click the Upload button:
   

   

4. A progress bar will be displayed:
   

   

5. The system will then check the file and then asks to proceed. To do this click the Apply Update button:
   

   

6. The system will then update, and then reboot. You should wait and do not power off until the firmware upgrade has completed.
   

   

7. Once the system has rebooted then you can check the footer on the Vertex homepage has the correct version number:
   

   Image RemovedImage Added

Delete Licence

...