...
On Milestone systems that have a large number of cameras it may be really beneficial to filter the camera list in Witness to show only the cameras being controlled by the Witness software, This can be achieved using permissions, which involves ensuring the global read permissions for all cameras are unset and instead only add the read option to the required devices. To filter the cameras, follow these steps:
Ensure you have a Witness user and a dedicated Witness Role in the Milestone system.
...
...
Ensure that the Witness user has been allocated to the Witness group.
Select the Witness role and select the Overall Security settings. Select Cameras and ensure that neither Full Control or Read is allowed, but allow all the bookmark options:
...
Select Alarms and ensure all options are enabled:
...
Save your changes.
Select the Device settings for the same security role and on the cameras which you want to appear in Witness, select the Read permission:
...
By default all other cameras should not have the Read permission enabled and therefore will not appear in Witness.
Save the settings.
Configuring the Modern Browser Plugin
...
On larger Milestone systems that include additional servers for either load or redundancy, or both, it may be necessary to add these servers to the configuration. The primary server should always be added in the main part of the configuration and only additional recording and events servers should be added here. To add additional servers:
Select Edit on the plugin configuration.
Select the + button in the Milestone Servers list.
Complete the relevant server details.
Repeat steps 2 → 3 as necessary.
Select Save when complete.
Mapping Cameras
...
Once the plugin has successfully connected to the Milestone Server it will retrieve a list of configured cameras. The mapping configuration is required to map each of the cameras configured in Witness to the corresponding cameras in Milestone. This process ensures that Witness creates bookmarks for the correct camera in response to an alarm in Witness. To map the cameras:
Select Edit on the plugin configuration.
For each Witness camera select the appropriate Milestone camera from the drop down list.
Select Save when complete.
Note that you can assign multiple Milestone cameras to a single Witness camera. This has the advantage of using a single camera to create bookmarks in multiple video feeds on the VMS. This is required for specific camera models that support dual optics.
...
The XProtect Smart Client is the desktop UI for Milestone XProtect server. On opening the client:
Under the Live tab, drag and drop the available cameras into the viewing slots.
...
The UI Stream and Camera(s) will be viewed concurrently.
...
Use the Playback tab to review alarms, and search through all recorded video.
...
Alarms can be managed and reviewed under the Alarm Manager tab.
...
| Note |
|---|
For the UI to be streamed, Witness must have a separate PPI Panel open, with UI Stream set to Enabled. |
...
The XProtect Web Client is the online UI for Milestone's video streaming. It is by default only accessible on the local network, but can be exposed to the public network for remote access capabilities. To open the web client:
Open up the Network explorer, OR type the XProtect Web Client's address directly into the web browser, of any computer connected to the local network.
Input the User username and password.
...
The Live tab will have all camera views displayed.
...
The Investigate tab is a simplified Playback, in order to search through the recorded video.
...
The Alarms tab lists all alarms, but the list can be filtered to specific parameters.
...
XProtect Client Plugin
The XProtect Client Plugin is a separate plugin designed by Navtech, to be utilised with the Milestone product. It is used with the XProtect Client application to automate certain actions for the operator. This includes automatically displaying relevant video feeds in response to an operator selecting a target in AdvanceGuard®. In order for the XProtect plugin to work correctly then each operator must have the same username in both Milestone and AdvanceGuard®.
...
This is the Setup Procedure for the Milestone XProtect Client Plugin for AdvanceGuard®.
Copy the Tungsten.Integration.Milestone.Client.Plugin folder from the management server install or the UI install in the plugins folder: %ProgramFiles%\Navtech Radar\Witness\Plugins\Tungsten.Integration.Milestone.Client.Plugin onto each pc that you wish to use the Milestone Client, at this location: %ProgramFiles%\Siemens\Siveillance VMS Video Client\MIPPluggins
...
The plugin can be verified in the client by clicking help>about:
...
-20210609-074036.png?version=1&modificationDate=1623224454812&cacheVersion=1&api=v2&width=331)
Then add these permissions:
...
...
Related Information
| Filter by label (Content by label) | ||||||
|---|---|---|---|---|---|---|
|
...