Page Comparison

...

1. Log on as an admin user. Select System Configuration:
   

   

2. Select the drop-down arrow in the Protocol field in the Data Output section:
   

   

3. Select CAT-240 from the Protocol drop-down:
   

   

4. You can then amend the parameters as desired (please refer to: https://navtechradar.atlassian.net/wiki/spaces/PROD/pages/2410283009/ASTERIX+CAT-240#Data-Output-Settings in the notes below for information regarding these settings) and click Apply:
   

   

5. A confirmation message will be displayed. Select Commit Changes:
   

   

6. A Data Applied Confirmation message will be displayed:
   

   

7. You will then need to reboot the system for the Data Output changes to take affect:
   

   

8. Click Reboot:
   

   

9. Below is an example of the CAT-240 output:
   

   

Data Output Settings

...