Page Comparison

...

For the CAT-240 protocol, each azimuth of FFT data may be sent as multiple messages (see Max Packet Size in the https://navtechradar.atlassian.net/wiki/spaces/PROD/pages/2410283009/ASTERIX+CAT-240#Data-Output-Settings below for more detail).

...

1. Log on as an admin user. Select System Configuration:
   

   Image RemovedImage Added

2. Select the drop-down arrow in the Protocol field in the Data Output section:
   

   Image RemovedImage Added

3. Select CAT-240 from the Protocol drop-down:
   

   Image RemovedImage Added

4. You can then amend the parameters as desired (please refer to: https://navtechradar.atlassian.net/wiki/spaces/PROD/pages/2410283009/ASTERIX+CAT-240#Data-Output-Settings in the notes below for information regarding these settings) and click Apply:
   

   Image RemovedImage Added

5. A confirmation message will be displayed. Select Commit Changes:
   

   Image RemovedImage Added

6. A Data Applied Confirmation message will be displayed:
   

   Image RemovedImage Added

7. You will then need to reboot the system for the Data Output changes to take affect:
   

   Image RemovedImage Added

8. Click Reboot:
   

   Image RemovedImage Added

Data Output Settings

...