All variants in the CIR radar range have 4x 20mm deep M8 tapped holes in the underside, in a 4” PCD arrangement. 4” PCD dictates hole centres with a 71.84mm spacing. Every radar is supplied with a stainless steel M8 fixings pack; it is recommended that these are tightened to between 19 & 22 Nm.
Below are downloadable 3D models of the CIR radar unit to support hardware integration in customer applications, and a printable drilling template to simplify preparing any necessary mountings.
| Attachments | ||||
|---|---|---|---|---|
|