...
Identify the Clutter.
Add a Threshold.
Add a Signal Gain (which is a multiplication of the signal, e.g. 25 x 2) or a Signal Offset (which is a fixed offset e.g. 25 + 20), or both:
Finally add a Signal Spread. For example, with a Signal Spread value of 1, if a clutter signal was 1 bin wide, then the spread would be 1 bin either side of the clutter signal:
...
Threshold (pwr): This sets the threshold above which the radar samples are considered to be clutter as opposed to noise. This threshold is relative to the median signal strength at each range.
...
| Filter by label (Content by label) | ||||||
|---|---|---|---|---|---|---|
|