To Mount the Radar Sensor and Camera
Info |
---|
We strongly recommend that you get assistance to mount the radar sensor and camera onto the tripods. The camera in particular is heavy and has a top-heavy construction. |
Column | ||
---|---|---|
| ||
Column | ||
---|---|---|
| ||
|
Note |
---|
When removing the radar sensor from the flightcase, and when carrying it, lift it only by the metal blue base. NEVER lift it by the white plastic dome. |
To Align the Radar Sensor and Camera
Position the two tripods 3 metres apart with the camera to the right of the radar, relative to where you will be positioned for the demonstration.
Set the height of the radar sensor and camera to approximately 1.8m above either the ground level, or the level on which the people you want to detect will be walking.
For full details about alignment, see “Aligning the Radar and Camera”.
Connecting the Equipment
You can connect the cables in any order, however, it is good practice to connect and switch on the mains supply as your final step.
Info |
---|
As well as the supplied cables, you will also require a standard network cable that is of sufficient length to reach from the radar/camera location to the place where your controlling computer will be placed. An environmental protection shell is supplied within the kit to convert one end of your standard cable into an IP rated plug for outdoor use. |
Column | ||
---|---|---|
| ||
To Connect the Equipment
|
Column | ||
---|---|---|
| ||
Connection Overview |
Related information
Filter by label (Content by label) | ||||
---|---|---|---|---|
|