...
Select the rule you wish to test. Then, select Test.
The Rule Test window will appear. Choose the length of the delay before the test starts, the Start Section, End Section and Lane you wish the alarm to be tested in, then select OK.
To run a test against all sections within the associated carriageway, select the All Sections option. The section option will be replaced with a delay setting. This option 
This will automatically generate an alarm for each section that you have chosen in turn, with a pause of the specified delay time between each alarm. By default the delay is 1 second.
Select OK when you are ready to start each section.
The alarm notifications will be visible (and if enabled, audible) and the relevant section will change colour to reflect the alarm severity, assuming this option was selected in the rule configuration.
...