...
Schematic Control: This allows you to choose between Live, Statistics or Playback options as well as the controls necessary for managing them.
User: The logged in user.
Role: The user’s role.
There are also options to highlight density and slow traffic.#
Schematic: This is a simplified view of the carriageway, which includes approximate placements of the radar along it.
Schematic Edit Controls: This enables you to edit the schematic.
System Profile: The Alarms: This displays the number of alarms at a glance. Clicking the icon will open the Live Alarms screen.
Profile: This shows the current selected System Profile. This can also act as a selector for a user with the relevant access to change the current profile. System Profiles
User: This button can be used to display the logged in User and their Role.
Schematic Edit Controls: This enables you to edit the schematic.
Notifications: Notifications will show for a short period before disappearing.
...
The Live screen displays the carriageways and if they flow of traffic along the carriageways in real time. If the carriageways are configured with separate lanes then these will be separated by white dashed lines. The direction of the traffic is marked using arrows similar to those on the PPI Map.
...
Clicking on a section of a carriageway will highlight that section in pink and will open an info panel with the carriageway name and section number. It includes details of the number of tracks, vehicles and large vehicles currently in that section, with their average speed in m/s:
...
There will also be alarm and queue indicators.. The bell icon will change colour from white to orange for any section based alarms for the selected section. If the queue icon turns orange then that signifies if there is a queue detected in the section.
...
This screen also displays any alarms in real time. For example, if there are warnings or threats given along a section or sections, then any effected lane/section blocks on the grid will be highlighted in orange or red.Dotted
...
Red dotted outlines on a carriageway section signifies that there is no radar coverage . Red represents no coverage, orange is for partial coverage:
...
for that section. The icons representing the effected radar will also change from green (normal coverage) to orange (partial coverage) or red (no coverage).
Live Alarm Panel
Beneath the Schematic area there is a panel to display interactive icons representing live alarm or queue incidents.
In the example below the two icons on the left-hand side show the number of live incidents (1 alarm and 1 queue3 queues), and the individual icons grouped on their right then display each incident in time order.
...
Hovering over an individual icon will show the Locate icon and details regarding the alarm. Clicking on an individual icon will synchronise with the map to focus onto that area, providing that the map is selected for the lower display. It will also will synchronise with the Schematic to focus on the effected lane/section blocks on the grid.
...
The depth of blue and yellow colours within the segment grows when the speed decreases level of slow traffic or the density increases. Clicking on the carriageway will open the Carriageway Stats:
...
When the Playback tab is selected then you will be able to playback tracks from the Live Alarms Tab list. The track will be displayed as a moving vehicle icon in yellow:
...
To playback a track:
Open the Live Alarms tab.
Select the Locate icon under Actions.
The track or tracks that raised the alarm will be replayed along the schematic, and the recording should start 10 seconds before the event that raised the alarm starts.
Playback Control
...
The Playback Control allows you to select a time by sliding the time button along the timeline:
...
Click on the System Profile icon button:
Then select the SystemProfile option:
This will open the Change System Profile dialogue:
Providing you have access, you can then quickly change the Profile as required.
...