...
The Integration Simulator is standalone software that allows the end user or integrator you to test and develop connections to integration plugins Integration Plugins. Please contact your sales manager if you wish to obtain a copy of the Integration Simulation software.
The simulator is able to simulate the majority of the Witness system output and enables testing of the system integration without having to spend days commissioning a full radar system beforehand.
| Info |
|---|
For customers and integrators intending to use the Integration Simulator, the documents assume a reasonable working knowledge of network communication. They are targeted at technical teams, typically with software development skills, who are integrating the output from Witness into external systems. |
| Note |
|---|
If the AdvanceGuard® Integration Simulator software won't start then you will need to delete the Highways Security Integration Simulator folder. It may should be located here: C:\ProgramData%ProgramData%\Navtech\Highways Security Integration Simulator. Please note that C:\ProgramData could be in a different place depending on where your window's application data folder is located. The Integration Simulator If the ClearWay™ Integration Simulator software won't start then you will need to delete the Highways Integration Simulator folder. It should be located here: %ProgramData%\Navtech\Highways Integration Simulator. The Integration Simulator should then start and create a new default config. |
...
Plugin Tree: Lists all the integration Integration and simulation plugins Simulation Plugins. The Start and Stop buttons will start and stop any enabled integration plugins Integration Plugins.
Plugin Configuration Panel: This panels panel displays the configuration for the currently selected plugin, either integration or simulator, including the Active Alarms List and the Active Tracks List.
Log Panel: Shows all the log output from the application and plugins.
The Integration Simulator will load up two distinctly different types of plugins - integration plugins and simulation plugins Integration Plugins and Simulation Plugins.
Integration plugins Plugins are the Navtech Witness system plugins that integrate with external systems. The purpose of the integration simulator application is to enable testing these integrations without having to fully deploy a Navtech system.
Simulation plugins Plugins are specifically for the Integration Simulator. They simulate the rest of the Navtech system and provide output to the integration plugins, such as alarms or carriageway statistics. Selecting a plugin, whether integration plugin or simulation plugin Integration Plugin or Simulation Plugin, will display the plugin's configuration on the Plugin Configuration Panel.
...
Like Witness, on first launching the Integration Simulator, enabled plugins will automatically start. However they can be controlled using the Start and Stop buttons if required.
...
Please see the details for each integration plugin:
the supported Integration Plugins here: Integration Configuration.
Configuring Simulation Plugins
...
Allows you to create, publish, clear and clear delete security alarms:
Add Alarms: Select this button to create a new alarm. Once clicked the alarm form will be enabled so you can populate the alarm details.
Send Alarms: Select this to publish all alarms to the plugins. The plugins will receive the alarms have and send out messages based on the current alarm states.
Clear Alarms: Select this to clear all selected alarms in the active alarms list Active Alarms List.
Acknowledge Alarms: Select this to acknowledge the selected alarms. This will clear the alarms from the list Active Alarms List.
Adding Alarms
To add a new alarm:
...
Select Add Alarms.
Edit the alarm details.
Repeat steps 1 & 2 as required.
Once ready, select Send Alarms to publish the configured alarm list.
| Info |
|---|
You can add several alarms at the same time. Once added, you will be able to edit any of these alarms by selecting them in the active list. However as soon as you select Send Alarms you will only be able to edit the alarm severity. Once you have sent the alarm list, the clear and acknowledge alarms options will become available. |
Update Existing Alarm
To update an existing alarm:
Select the alarm you wish to update.
Change the severity (this is the only property available to change after you have published the alarms at least once).
Select the Send Alarms.
Clearing Active Alarms
To clear active alarms:
...
Select the required alarms from the active list.
Select the Clear Alarms button.
Alarms will be marked as cleared in the list and alarm updates will be automatically published.
...
| Info |
|---|
Alarms must have been sent before they can be cleared. |
Acknowledging Alarms
To acknowledge a cleared alarm:
...
Select the cleared alarms you wish to acknowledge.
Select Acknowledge Alarms.
The alarm will be acknowledged and automatically removed from the list. Alarm updates will be automatically published.
...
| Info |
|---|
Alarms must have been cleared before they can be acknowledged. |
Camera Commands
Allows you to create and publish camera movement commands. The simulator provides 3 default cameras for testing.
...
Send Camera Command: Sends a camera command for the selected camera.
To send a camera control:
Select a camera from the list.
Enter a movement type and relay Id, if required.
Select the Send Camera Command button.
Tracks
Allows you to create and publish tracks. Tracks can include the normal position and movement data as well as broken rule information.
...
Add Track: Allows you to enter new track details.
Send Tracks: Select this to publish the active list of tracks.
Clear Tracks: Select this to clear the selected tracks.
To Add Tracks
...
Delete Alarms: Select this to delete all selected alarms in the Active Alarms List.
Auto Acknowledge: Select this check box to automatically acknowledge the selected alarms when the alarms have been cleared. This will clear the alarms from the Active Alarms List.
The following fields are automatically populated when you add an alarm, however, they can be edited:
Description: The description of the alarm which you can edit.
Severity: Defines how a target should be marked when it breaks a rule:
Unknown
Friend
Warning
Threat
Priority: Allows you to optionally apply a ‘weighting’ to any rules that invoke an action using comparative values.
Lowest
Low
Medium
High
Highest
Alarm Type: Select from the list of alarm types:
None
Follow
Alarm
Alarm And Follow
Radar: Select from the list of radars.
Rule Id: Auto populated with 1 but this can be edited during configuration.
Relay Id: Auto populated with 0 but this can be edited during configuration.
Area: Select from the list of areas.
Adding Alarms
To add a new alarm:
Click the Add Alarms button:
The alarm details field will be enabled so you can edit the alarm details in the Security Alarms section, which will then populate the Live Alarms List beneath it (both highlighted):
You can then add more alarms by repeating steps 1 to 2.
Next, select Send Alarms to publish the configured Active Alarms List:
Once you have sent the alarms, there is an alarms sent message displayed in the Log Panel, highlighted above.
| Info |
|---|
You can add several alarms at the same time. Once added, you will be able to edit any of these alarms by selecting them in the Active Alarms List. However as soon as you select Send Alarms you will only be able to edit the alarm severity. Once you have sent the Active Alarms List the Clear and Acknowledge Alarms options will become available. |
Update Existing Alarm
To update an existing alarm:
Select the alarm you wish to update; you can select all alarms by selecting the checkbox in the column header or select individual alarms:
Change the severity (this is the only property available to change after you have sent an alarm):
Click Send Alarms.
Clearing Active Alarms
To clear active alarms:
Select the required alarms from the Active Alarms List:
Select the Clear Alarms button:
Alarms will be marked as cleared in the list and alarm updates will be automatically published:
| Info |
|---|
Alarms must have been sent before they can be cleared. |
Acknowledging Alarms
To acknowledge a cleared alarm:
Select the cleared alarms you wish to acknowledge.
Select Acknowledge Alarms.
The alarm will be acknowledged. Alarm updates will be automatically published:
| Info |
|---|
Alarms must have been cleared before they can be acknowledged. |
Delete Alarms
To delete a cleared alarm:
Select the alarms that wish to delete and click the Delete Alarms button:
The system will delete the selected alarms, and remove them from the Active Alarms List.
| Info |
|---|
Alarms must be acknowledged before they can be deleted. |
Camera Commands
Allows you to create and publish camera movement commands. The simulator provides 3 default cameras for testing.
...
Send Camera Command: Sends a camera command for the selected camera.
To send a camera control:
Select a camera from the list.
Enter a movement type - Automatic or Manual, and Track Id, if required.
Select the Send Camera Command button.
Tracks
Allows you to create and publish tracks. Tracks can include the normal position and movement data as well as broken rule information.
...
Add Track: Allows you to enter new track details.
Send Tracks: Select this to publish the active list of tracks.
Clear Tracks: Select this to clear the selected tracks.
The following fields are automatically populated when you add a track, however, these fields can be edited:
X/Y/Z: These are the location coordinates of the track.
Severity: Defines how a target should be marked when it breaks a rule, e.g. Warning.
Speed (m/s): The speed of the track.
Direction (degs): The direction in which the track is travelling.
Size in Range: The size of the Track along the range.
Size in Azimuth: The size of the Track along the azimuth.
Classification: Allows you to select one of the entities from the drop-down list; e.g. Large Vehicle.
Probability (%): Allows you to define a confidence level which must be matched or exceeded for a given track before it can be considered within the rule.
Radar: Select the radar from the radar list.
To Add Tracks
...
To add a track:
Select Add Track.
The track will be added to the active track list with default data.
Edit the settings to suit your testing.
Repeat these steps to add more tracks if required.
To send the active tracks, select the Send Tracks button.
To include rule Rule Ids in the track broken rule data, select the required rules from the rule list Rule List before sending the tracks.
| Info |
|---|
Once you have added a track, you can easily change the track attributes by selecting it in the list and then changing the attributes in the Tracks form. This allows you to add multiple tracks with the ability to update them as required. The tracks will remain editable even after you have selected Send Tracks. Each time you select Send Tracks the same tracks will be sent but with whatever values that have been set in the Tracks form. This gives you the ability to simulate a moving track. |
...
Select one or more tracks from the active tracks list by using the Remove checkbox column. You can also select all of the tracks by selecting the Remove checkbox in the column header.
Select the Clear Tracks button.
The tracks will be removed from the Active Tracks List.
Highways Simulator
The included Highways Simulator simulation plugin can be used to set up carriageways and radars and can also be used to create carriageway statistics and highway alarm messages.
If the software won't start then you will need to delete the Highways Integration Simulator folder and then the Integration Simulator should create a new default config.
...
| Info |
|---|
By default, the Highways Simulator creates 2 carriageways with 10 sections each and 5 radars. |
...
Select Configure Radars to open the Configure Radars dialogue. Here you can choose the number of radars you need:
Click OK.
This will delete all existing radars and create new ones until the desired number is reached. Any integration plugin Integration Plugin tied directly to radar or radar entity updates will be affected by this.
...
To change the number of carriageways and, or the number of sections per carriageway:
Select Configure Carriageways to to open the Configure Carriageways dialogue. Here you can change the number of carriageways and sections per carriageway:
Click OK.
This will recreate the carriageways as required. All carriageways will be created with 4 lanes and with the default rules; Debris, ERA, Person, Queue, Reversing Vehicle, Slow Vehicle and Stopped Vehicle.
| Info |
|---|
By default, carriageways are generated with settings that include an 11 m/s queue threshold, 16 m/s heavy traffic density and a track density queue of 4. For some integration plugins Integration Plugins that are able to output section queue and heavy traffic flags, these criteria will need to be met. |
...
Select Save Configuration to save the current configuration to file:
You will receive a log message indicating a successful save and where the configuration file has been saved to. It should look something like "C:\ProgramDataFor example; %ProgramData%\Navtech\Highways Integration Simulator\HighwaysSimulatorConfig.xml". C:\ProgramData will be different depending on where your window's application data folder is located.
...
.xml
Section and Rules
You can now administer the Sections and the Rules for your carriageways to send alarms against carriageway rules by selecting the sections and rules we you want to raise the alarm against. Optionally, we you can select a lane for the alarms as well. To do this:
Ensure the Sections and Rules tab is open:
Here there There will be a list of the sections you have configured with the rules.
You can select sections and the rules that you wish to apply by selecting their check boxes:
In the example above, Section 1 of Lane 1 has been chosen with a variety of rules. The Auto Acknowledge check box has been selected by default.
...
You can now add your selection to the alarm list Live Alarm List.
Click the Add Alarms button:
This will add each of the rules for the section to the Live Alarms List as highted above.
Selecting the check box on the Live Alarms List toolbar will select or deselect all of the checkboxes below it:
Alternatively, you can select individual rows in the list.
...
Click the Send Alarms button:
In this example, the ICD-100 XML Plugin has been enabled and the Log Panel shows that the 6 alarms have been sent (highlighted in pink).
...
Click the Clear Alarms button; you can select all alarms by selecting the checkbox in the column header or select individual alarms:
As the Auto Acknowledge check box has been selected then clearing the alarms will also acknowledge them as in the example above.
If the Auto Acknowledge check box has not been selected:
Clicking on the Clear Alarms button will clear the alarms but not auto acknowledge them:
...
Select the alarms you wish to acknowledge which will enable the Acknowledge Alarms button:
This will then clear acknowledge the alarms from on the list:
Delete Alarms
You can delete a single or multiple all alarms by selecting the checkbox in the column header or select individual alarms:
Select the alarm or alarms from the list and click the Delete Alarms button:
The selected alarms will be removed:
...
Click the Reset Configuration button:
This will clear the sections, rules, Alarm Lane and alarm list Live Alarm List, and return will select the Auto Acknowledge check box to selected.
Send Statistics
You can use the commands available in the Carriageway Statistics section to send statistics Send Statistics or Traffic Analysis reports.
Click Send Statistics: this will will send randomly generated statistics for each section of the selected carriageway. You can change the selected carriageway from the Carriageway dropdown:
These statistics will be displayed within the Log Panel, as above.
Clear Traffic
To send zero traffic stats for every section of the selected carriageway with no traffic:
Click the Clear Traffic button. This will also raise the flag that the entire carriageway is clear of traffic.
...
Click the Send Section TA button:
This will send out a randomized traffic analysis message with reports for the selected sections. In the above example it has sent out messages for section Section 1.
Send Clear TA
To see a message showing that there is no traffic within a section:
Click Send Clear TA to send a traffic analysis message for all of the selected sections in the Section and Rules tab:
...
Related Information
| Filter by label (Content by label) | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...