Introduction
...
Track Check Period (ms): How often the system checks for expired tracks.
Maximum Sightings: Maximum number of sightings stored of a single track - after which the system stops recording sightings.
...
Use Radar NTP Time: This is the Network Time Protocol data sent with the tracks from the radar. NTP is a networking protocol for clock synchronisation between computer systems over packet-switched, variable-latency data networks.
Tracker SSH Start Delay (ms): This sets the amount of delay after the Track Engine has connected to the Onboard Tracker, before we connect to the tracker and radar via SSH to check the status and retrieve logs.
...
Audible Alarm: Select to have a sound emitted when a system alarm is active.
Silence On All Clients: When disabled, clicking the Silence Alarm button will silence the alarm immediately but only on that client. If enabled, an alarm update is sent to the management server with an alarm silence flag set to true. When the next alarm list is published by the management server and processed, each of the clients will check if the incoming alarm has been silenced, and if so, will silence the alarm in any clients with the option enabled.
Custom Threat Sound: The sound clip emitted for a threat alarm (this supports most common sound formats including .mp3 and .wav).
...
Threat Area Colour: Select the colour to be flashing in an area when an alarm with a severity of threat has been triggered.
Save Still From Image Server: The Image Server can save a still image if this setting is enabled.
Acknowledge Options
...
Alarm Acknowledge Description: This gives the user the option to enable or disable Alarm Acknowledgements for Intruder, Wildlife, Nuisance or Unknown alarms.
...