Introduction
...
Disable System Scheduler: This prevents the scheduler from running which means all scheduled jobs are suspended until this this option is cleared. See Schedules for more information.
Customer Incident Report Logo: This option allows customers to upload their own logo. The file should be no more than 300x200 pixels at 96 dpi resolution. Once saved, the file will be stored in the database and the file name will be displayed in the text box. The new logo will be displayed on the top right of the Incident Report. The logo can also be cleared by the user by clicking the clear icon. If the file name is empty then the Navtech Radar logo will be displayed by default. https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/775913552/Alarms+Queries#Incident-Report
...
Track Check Period (ms): How often the system checks for expired tracks.
Maximum Sightings: Maximum number of sightings stored of a single track - after which the system stops recording sightings.
...
Use Radar NTP Time: This is the Network Time Protocol data sent with the tracks from the radar. NTP is a networking protocol for clock synchronisation between computer systems over packet-switched, variable-latency data networks.
Tracker SSH Start Delay (ms): This sets the amount of delay after the Track Engine has connected to the Onboard Tracker, before we connect to the tracker and radar via SSH to check the status and retrieve logs.
...
Enabled: This is where you enable central licensing, documented here: Centralised Tracker Licencing.
...
Alarm Acknowledge Description: This gives the user the option to enable or disable Alarm Acknowledgements for Intruder, Wildlife, Nuisance or Unknown alarms.
...