...
Enable the Configuration Function, then select Areas in the Configuration Tree.
In the Configuration Panel, select New, then select Area to activate the Create New Area Wizard.
In the Create New Area Wizard, select 'Detection' from the Type drop-down list. Configure the rest of the options, and select Finish.
Use Standard standard Creating and Editing to edit the shape and orientation of the Detection Area and position the label. Creating and Editing Entities
Edit any other details through the area configuration form as required.
Select Save.
...
Select the site in the Configuration Tree, then select Radar Detection Area Setup in the Configuration Panel.
The Radar Detection Area Setup window will open. Choose a Tracking Parameter to apply to your Detection Area from the drop down list, then select Finish.
Your Detection Area has now been assigned the selected Tracking Parameters. Tracking Parameters determine how and what the tracker detects and tracks. Learn more about Tracking Parameters here.
| Info |
|---|
Learn how to manually assign Tracking Parameters on the Detection Areas page.: Detection Areas |
Assigning a Detection Area to Selected Radar
...
Long left click the detection area to open the Radial Menu and select the Radar Parameter Modification:
This will open the Radar Parameter Modification screen. This will display a list of all available radar:
Select the desired Tracking Parameter from the drop down list for each radar and select Apply.
| Info |
|---|
If you do not select a tracking parameter then the detection area will not be assigned to that radar. This allows you to choose which radars you want to configure for the selected detection area. If you wish to remove this detection area from a previously configured radar then select the remove (X) button. |
...
| Note |
|---|
If your radar are not aligned, you will need to align the radar data to your Background Image before you start the fine tuning process. For more information please visit this page: Radar Alignment. |
To fine tune an area:
Within the map or in the radar group select the relevant Radar.
Within the Selected Entity Info Panel, select Radar Data, to overlay the live radar signal within the site map. It is possible to simultaneously overlay the output from two or more radar sensors. However, this uses a sizeable amount of processing power so it is advisable to show no more than two or three sensor overlays at a time.
Select the source Raw.
Ensure you can see the raw data where you want to apply the detection on the map.
Click on the Detection Area to select it, then configure it using the following the information on the Creating and Editing Entities page: Creating and Editing Entities. Use the Raw Data to shape the Detection Area around visible objects and boundaries. In this example the detection areas is being redrawn around the tree line to ensure we achieve maximum detection but without extending the area into the trees where the radar cannot see.
When the area has been fine tuned, select Save to store the new area shape.
...