...
In the example below, the camera is in the Timeshare Group, as displayed in the Configuration Tree. It is circled in pink on the PPI Map has been selected by left-clicking Left Clicking on it. This will open the Camera Mini Control on the right-hand side:
...
To focus a camera on a particular area, simply right-click Right Click the area you wish to target and the camera will move to dwell there:
...
The Selection Menu is accessed by a long left-click Long Left Click on the PPI Map on the camera you wish to access.
The The Selection Menu will open and allow you to access to the Camera Mini Control:
...
Select the Follow / Latch Targeticon, which is outlined in pink in the image below, on the Selected Track Mini Control:
Alternatively, right-click Right Click the target.
In the example below, the selected track 2159 (in pink) had been automatically followed by the camera, however, the operator latched a camera to track 2-1197 (in red), by right-clicking Right Clicking the track.
...
| Note |
|---|
When using latching you will most likely STOP automatic camera following until the latched target is out of range. |
...
You can also utilize the mouse to move to an area, by Left - Click+Hold the mouse curser in the spot you wish to move the camera to.
When you begin to Left - Click the mouse a green ring will appear:
...