...
This can be changed by clicking on the camera:
This will load the Camera Info panel. The user can change the Operation Mode setting by clicking on the Automatic label to change it to Manual Override and vice versa:
Follow Target
A camera can be selected to follow a target on the Mobile client in two ways:
Right-click a target to latch a camera. This will force the target to be followed by the most appropriate camera until the latch is cleared:
Left-click a target to open the Track Info panel, and then click on the Follow Target icon to change the setting to Following:
The system will then set the most appropriate camera to follow the target for as long as it’s tracked:
...
The user can Alarm or Disarm an area:
Left-click an area and select the Arm / Disarm option from the area Info panel:
This will activate the Radar Info panel. The user can change the area type from Alarmed to Not Alarmed (and vice versa), by clicking on the Alarmed or Disarmed button.
This will open a Timeout dialogue which has the same time out settings as the Entity Timeouts in the main application. The user can then select the desired timeout period of 5m to 125m; after which the area will automatically revert to the previous state. The Immediate option bypasses the timeout and indefinitely fixes the area at the selected state.
In the example below, the Path area has been disarmed, so the alarm will no longer be triggered by a target in that area:
...