...
- Enable the Range Rings option to overlay range lines every 100m onto the sensor view
Radar sensor configurations
A sample table to record data for each radar.
...
Radar Sensor
...
Serial No
...
IP Address
...
Subnet Mask
...
GPS position
Lat(N)
...
Long (E)
...
Radar Base Plate Angle (deg)
...
Example
...
100
...
192.168.1.170
...
255.255.255.0
...
59.25023
...
17.85109
...
+1.5
...
A1
...
...
...
...
...
...
...
A2
...
...
...
...
...
...
...
A3
...
...
...
...
...
...
...
A4
...
...
...
...
...
...
Outline System Diagram
Radio Frequency Energy Compliance
...
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
...
Installing in Harsh Environments
Chesterton© 740 Aerosol Application to I-Series Radar Connectors on Installation
...
Health & Safety
...
- Attach the power and data connectors to the radar. Checking their surfaces are free from dirt, oil, grease and moisture.
- If the radar has a vent plug attached temporarily cover or mask the vent so that when spraying the connectors no spray enters the vent plug.
- Evenly apply the spray to the connectors. Observing the Health and Safety guidelines while doing so.
- While drying residual product can be removed with a cloth. After drying a degreaser can be used to remove the product.
- Remove the temporary vent plug mask/cover to allow the plug to breathe.